bioMetric SpinalPak Полное руководство - Страница 8

Просмотреть онлайн или скачать pdf Полное руководство для Медицинское оборудование bioMetric SpinalPak. bioMetric SpinalPak 20 страниц. Non-invasive spine fusion stimulator system

Печатать страницу

Directions for Use

RECOMMENDED USAGE

The Biomet

SpinalPak

days of continuous therapeutic treatment for 24 hours per day. The recommended daily therapeutic

treatment is continuous for 24 hours.

OPERATING INSTRUCTIONS

The Biomet

SpinalPak

to be convenient to use, comfortable to wear, and safe to operate. Patients should begin using the

Biomet

SpinalPak

instructions for use and having received instructions from their prescribing physician.

To begin treatment - Electrode Placement

• C lean and dry the skin where the electrodes will be placed. Trimming (not shaving) body hair from

the electrode application area is often helpful.

• N ote: To ensure electrode placement and adhesion, you may use one of the provided electrode

retainer patches. Place one electrode

two to three inches to the left of the

area of the surgery and a second

electrode two to three inches to the

right of the area of the surgery so that

the electrodes are four to six inches

apart. See Figure 2. Depending on the

patient's ability to move after surgery,

it may be helpful for the patient to

ask another person to assist them

in placing the electrodes. See instructions for use on Page 10. The patient should consult their

prescribing physician or Biomet if they have any questions or concerns regarding proper electrode

placement. If their skin becomes abnormally red at the electrode sites, the electrodes should be

moved adjacent to the original sites. If the redness does not go away after 48 hours with the

electrodes removed, the patient should contact their prescribing physician.

Tips:

Loose electrodes – Confirm that both electrodes are in complete contact with clean, dry skin. See

instructions on the electrode packet.

Incomplete circuit/disconnection – Check all connection points, confirming a snug fit.

Broken electrode lead wire – If alarming continues

after confirming connection, attach a new electrode

lead wire.

To begin treatment - Lead Wires

• T he patient is provided with two stimulator lead wire

lengths with the Biomet

Spine Fusion Stimulator System. The patient should

select the length of the stimulator lead wire in order

to provide both convenience and comfort when

wearing the stimulator during treatment.

• I nsert the stimulator lead wire male connection into

each female electrode lead wire connection.

• I nsert the lead wire plug into the opening at the top of the stimulator. See Figure 3.

Non-invasive Spine Fusion Stimulator System is designed to deliver 270

Non-invasive Spine Fusion Stimulator System has been specifically designed

Non-invasive Spine Fusion Stimulator System immediately after reading the

SpinalPak

Non-invasive

Figure 3

Figure 2