diatesse XPER TD-4289B Руководство пользователя - Страница 10
Просмотреть онлайн или скачать pdf Руководство пользователя для Измеритель глюкозы в крови diatesse XPER TD-4289B. diatesse XPER TD-4289B 15 страниц. Blood glucose & ketones monitoring system
Печатать страницу
NOTES
• Replacing the battery will not affect
the test results stored in the device's
memory.
• As with all small parts, the batteries
must be kept out of reach of children.
Alert the emergency services
immediately if a battery is swallowed.
• Batteries can leak chemicals if they are
not used for extended periods.
Remove the batteries if you will not be
using the device of a lengthy period
(i.e. 3 months or more).
• Dispose of used batteries properly,
in accordance with the local
regulations.
18
Caring for your meter
Cleaning
1. To clean the exterior of the meter, wipe
it off with a cloth that has been lightly
dampened with tap water or a mild
detergent. DO NOT rinse off with water.
2. DO NOT use organic solvents to clean
the meter.
Storing the meter
• Storage conditions: -20 °C to 60 °C
(-4 °F to 140 °F), between 10% and 93%
relative humidity (non-condensing).
• Always store or transport the meter in
its original case.
• Do not drop the meter or subject it
to strong shocks.
• Keep it out of direct sunlight and
high humidity levels.
Disposing of your meter
A used meter must be treated as
contaminated waste that carries a risk of
infection while performing measurements.
The batteries of the meter must be removed
and the meter must be disposed of in
accordance with the local regulations.
The meter does not fall under European
Directive 2012/19EU on waste electrical and
electronic equipment (WEEE).
Caring for your test strips
• Storage conditions: 2 °C to 30 °C and
between 10% and 90% relative humidity
(non-condensing) for blood sugar test
strips and 2 °C to 30 °C and between
10% and 85% relative humidity (non-
condensing) for β-ketone test strips.
DO NOT freeze.
• Keep the tests strips in their original
tube. Do not place in a different tube. For
foil-wrapped test strips: do not unwrap
until required.
• Store the packaging containing the test
strips in a cool and dry place. Keep away
from direct sunlight and heat.
• Reseal the tube immediately after
removing a blood sugar test strip.
• Ensure that your hands are clean and dry
before touching a test strip. Use the test
strip immediately after removing it from
the tube/foil packaging.
• Do not use a test strip after its expiry date,
as the result may be inaccurate.
• Do not bend, cut or alter the blood sugar
test strip.
• Keep tubes and foil packaging containing
test strips out of reach of children.
Immediately alert the emergency services
if one is swallowed.
For further information, see the package
insert for the test strips.
Important information on
the control solution
• Only use TaiDoc (W2) control solution
for your meter.
• Do not use the control solution after its
expiry date or later than 3 months after
opening it. Write the date you opened it
on the control solution bottle and dispose
of any remaining solution after 3 months.
• The recommended room temperature
when performing a test with the control
solution is between 20 °C and 25 °C
(68 °F and 77 °F).
• Ensure that the control solution,
your meter and the test strips are at
the recommended temperature before
conducting a test.
• Shake the control solution well before use
Discard the first droplet of control solution
and wipe the dispensing tup clean in order
to guarantee a pure sample and accurate
result.
• Keep the control solution properly sealed
at a temperature between 2 °C and 30 °C
(35.6 °F and 86 °F).
DO NOT freeze.
19