EasyPet EP-180R Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Средство для ухода за домашними животными EasyPet EP-180R. EasyPet EP-180R 11 страниц. Rechargeable multidog remote training system
Печатать страницу1 x Test bulb for testing static shock correction;
•
1 x Min screw driver for installing 6F22 9V battery on transmitter;
•
1 x User's manual (English).
•
How the System Works
Consistent and correct use of this remote dog trainer allows you to reinforce commands and correct misbehaviour from up
to 500 meters. There are 50 groups of warning tones that can be used for praise, warning or silent recall. Or use the
remote transmitter to send a signal, activating the collar receiver to deliver a vibration correction or a harmless stimulation.
It has 10 levels of vibration corrections and 99 levels of static intensity so you can find the best level for your dog's
temperament and the type of training you do.
More Information about Static Pulse Correction
The 99 levels of static pulse correction include 10 degrees of intensity (from weakest to strongest). Each degree of static
intensity is divided by 10 different correction durations (from 200ms to 2s). For example, for level 1 of static pulse
correction, it has the weakest static pulse intensity and the shortest correction duration (200ms). While at level 10, it has
the weakest static pulse intensity (same as level 1) and the longest correction duration (2s). For level 90 to level 99, it has
the strongest static pulse intensity with different correction durations (from 200ms to 2s).
Important:
This remote dog training system has a range of up to 500 meters. Depending on the way you hold the
remote transmitter, the maximum range may vary. For consistent results at longer ranges, hold the remote transmitter in a
vertical position away from your body and above your head. Terrain, weather, vegetation, transmission from other radio
devices, and other factors will affect the maximum range.
Quick Start Guide
Step 1: Prepare the Remote Transmitter
Transmitter is fitted with battery. To switch on the transmitter, press and hold ON button (+) on the transmitter for
about 3 seconds. To switch it off, please press and hold OFF button () for about 3 seconds. Important: If there is
only one bar left on the Remain Battery Icon on LCD display, it means the battery is running down and need to
be replaced.
(How to replace battery for the transmitter: unscrew the battery compartment cover using the supplied mini screw
driver. Follow the positive (+) and negative () signs inside the transmitter battery compartment and on the 6F22
9V battery and insert the 9V battery into the transmitter correctly. (Improper installation will cause damage!)
Screw the cover back tightly.)