Dibal D-900 Базовое руководство - Страница 12

Просмотреть онлайн или скачать pdf Базовое руководство для Весы Dibal D-900. Dibal D-900 16 страниц.

PAPER CHANGE

5.1.

Take the following steps to change the paper in the printer:

1. Open the new roll.

2. Open the printer cover. Remove any remains of the

previous paper roll.

3. Bend the paper and insert the paper in the slot. Be

careful to insert it in the right slot as otherwise the

machine will not detect the paper.

4. Press

until the paper comes out on the other side of

the roller.

5. Cut the paper.

6. Close the cover.

7. Press

until the paper emerges.

Paper

5.2.

The scale is fitted with a cartridge system to facilitate paper change in the labelling machine.

1. Open the front cover of the machine by pressing the button located on the left side of the machine.

2. Once opened, you will see three blue levers. Turn the lever furthest on the right anti-clockwise to

release the cartridge.

3. Remove the cartridge to make the paper change.

Once you have removed the cartridge, turn the remaining two levers in order to remove the paper holder of

the old roll and remove the excess cardboard.

4. Place the new label roll in the space provided inside the cartridge, and slide the paper through as

indicated in the photo. Be sure to place the paper over the label support and align it properly with the

paper guide.

5. If the width of the label roll is less than 60 mm. place a lid on the cartridge (an optional kit) and tighten the

two levers.

6. Last of all, place the cartridge in the scale and turn the lever on the right clockwise.

Basic Manual D900

Thermal

Head

Zona de

soporte

del papel

Roller

Thermal head

Slot for

Inserting paper