Axis Axis 211 Руководство по быстрой установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Камера безопасности Axis Axis 211. Axis Axis 211 8 страниц. For somat edaq; somat edaq lite; axis m7001 video encoder; korenix jetnet poe switch
Также для Axis Axis 211: Технические характеристики (6 страниц), Брошюра и технические характеристики (4 страниц), Брошюра (2 страниц), Технические характеристики (2 страниц), Краткое руководство по эксплуатации (16 страниц)

6. The Live View page of the AXIS 210/211 is displayed, with links to the Setup

tools that enable you to customize the camera to your specific needs.

Accessing the AXIS 210/211 from the Internet

Once installed, your AXIS 210/211 is accessible on your local network (LAN). To access the camera from the Internet you must

configure your broadband router to allow incoming data traffic. For security reasons this is usually done on a specific port.

Please refer to the documentation for your broadband router for further instructions.

For more information, please visit the AXIS Internet Dynamic DNS Service at www.axiscam.net or, for Technical notes on this

and other topics, visit the Axis Support Web at www.axis.com/techsup

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default settings:

Disconnect the power cable (or the network cable if using PoE on the AXIS 211).

Press and hold the Control button (underside) and reconnect power.

Keep the button pressed until the Status Indicator displays yellow (this may take up to 15

seconds), then release the button.

When the Status indicator displays green (which can take up to 1 minute) the camera is

reset to the factory default settings.

Re-install the AXIS 210/211 using one of the methods described in this document.