Axis Axis 211 Краткое руководство по эксплуатации - Страница 11

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Камера безопасности Axis Axis 211. Axis Axis 211 16 страниц. For somat edaq; somat edaq lite; axis m7001 video encoder; korenix jetnet poe switch
Также для Axis Axis 211: Технические характеристики (6 страниц), Брошюра и технические характеристики (4 страниц), Брошюра (2 страниц), Технические характеристики (2 страниц), Руководство по быстрой установке (8 страниц)

A3090-1.1 en

NOTE

Once configured, a camera may be used by any networked eDAQ or eDAQ

by following steps 8 and 9 for each system. However, the camera cannot provide the

maximum frame rate to more than one eDAQ system at a time. For example, two

eDAQs using the same camera and configured to request 30 frames per second only

receive a maximum of 15 frames per second each.

NOTE

The camera image may be upside down by default. To rotate the image, refer to the

Axis documentation

1.3

Step 2: Configure and Run a Test

1.3.1

To record camera data, configure a TCE test with a camera message channel.

1. Start TCE (3.14 or later) and either open an existing test or create a new test. Make

sure to select SIE as the data option in the network setup window.

2. Perform a hardware query from the hardware setup window to list the eDAQ

hardware including an entry for the network camera listed as "MPB Camera."

• If there is no camera entry, the camera is not configured correctly.

3. From the transducer and message channel setup window, click Add and select

Message (Camera) to bring up the channel configuration options.

4. Enter an appropriate channel ID and description.

5. Click Message Channel Specifics... to show more configuration options.

Network Camera Devices

lite simply