Easypix GoXtreme GX1 Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для фотоаппаратов Easypix GoXtreme GX1. Easypix GoXtreme GX1 11 страниц. Dual gimbal
Печатать страницу
WARNING
Do not turn on the gimbal until you have correctly installed and adjusted
your smartphone or action cam.
Adjusting the smartphone or action cam position during operation can cause damage!
Please charge the gimbal fully before using for the first time.
When mounting action cams please use the included action cam adapter.
The gimbal should only be used in temperatures from 0℃ to 40℃.
Use of the battery in environments above 40℃ can lead to a fire or explosion.
Use of battery below 0℃ can lead to serious damage.
CHARGING THE BATTERY
1. Do not put the gimbal near flammable materials or on flammable surfaces.
Never leave the battery unattended during charging to prevent any accident.
2. Do not charge the battery immediately after use, when the gimbal temperature may be too high.
Let the battery cool down to at room temperature. Charging the battery with its temperature over 40℃ or
lower than 5℃ may lead to leakage, overheating, or battery damage.
3. Examine the charger and cable before use. Make sure there is no damage to the enclosure, cord, plug,
or other parts. Never use a damaged charger cable. Do not clean the charger cable with alcohol or other
flammable solvents.
4. The battery will automatically stop charging when it is full.
STORAGE
1. Do not leave the gimbal near heat sources such as a furnace or heater,
or leave it exposed inside a vehicle on hot days.
2. Store the gimbal in dry environment, and never store it in any environment with temperature of over 40℃.
3. In order to prevent over-discharge of the battery which may result in damage to the battery, do not leave
the gimbal unused for too long in the case where the battery has been completely discharged.
TRAVEL NOTICE
Discharge the battery power to 5% or lower before carrying the battery on an air flight.
CAUTION
1. The gimbal is a high-precision control device, damages may be caused to it if it is dropped or subject to
external force, and this may result in malfunction.
2. Make sure the rotation of gimbal axes is not blocked by external force when the gimbal is switched on.
3. The gimbal is not waterproof or water-resistant. Ensure contact with liquid of any kind is prevented.
It is recommended to use a dry cloth for cleaning.
4. Protect the gimbal from dust and sand during use.
5. Hold the gimbal's handle still in when it is powering up to ensure it starts up successfully.
6. Make sure the batteries are fully charged before each use.
7. Discharge the battery to 40%~65% if it will NOT be used for over 10 days.
This can greatly extend the battery life.
8. Charge and discharge the battery completely once every 3 months to keep it active.
EN