HTC VIVE Руководство пользователя - Страница 18

Просмотреть онлайн или скачать pdf Руководство пользователя для Гарнитуры виртуальной реальности HTC VIVE. HTC VIVE 41 страница. How to use with steam
Также для HTC VIVE: Руководство по безопасности и регулированию (40 страниц), Руководство по эксплуатации (9 страниц), Руководство пользователя (27 страниц), Руководство по установке (9 страниц), Руководство (30 страниц), Руководство (14 страниц), Руководство по монтажу (5 страниц), Как использовать (3 страниц)

HTC VIVE Руководство пользователя
18
Hardware and product care
6
Sync cable port (optional)
7
Micro-USB port (for firmware updates)
§ Do not attempt to pry open the base stations as doing so could injure you or damage the
product.
§ If the front panel is cracked or damaged, stop using the base stations.
Installing the base stations
Before installing the base stations, decide first whether you want to set up a room-scale or
seated/standing-only play area. See
During unboxing, remove the thin film that covers the front panel of the base stations.
1.
Mount the base stations diagonally at opposite corners of your space.
For details on how to use the provided mounting kit, see
20.
You can also use tripods, light stands, or cargo poles when mounting the base stations, or
even place it on stable book cases. Just avoid using unstable mounting solutions or
surfaces that are prone to vibration.
2.
Adjust the base stations so that the front panels are facing toward the center of the
play area.
3.
Attach the power cables to the base stations, and then plug them each into a power outlet
to turn them on.The status lights should be green.
4.
Connect the base stations and set the channels.
Without the sync
cable
With the sync cable
(optional for added
reliability)
Planning your play area
Press the Channel buttons at the back of the base stations so
that one base station is set to channel "b", while the other is set
to channel "c".
Press the Channel buttons at the back of the base stations so
that one base station is set to channel "A", while the other is set
to channel "b".
on page 24.
Using the mounting kit
on page