HTC 420 VS Руководство пользователя - Страница 32
Просмотреть онлайн или скачать pdf Руководство пользователя для Напольная машина HTC 420 VS. HTC 420 VS 46 страниц. Floor grinder | concrete floor sander
Также для HTC 420 VS: Руководство (50 страниц)
Печатать страницуMaintenance and repairs
•
•
Tip!
Recondition all the grinding holders at the same time.
5.5. Every month (or 100 hours)
•
•
•
•
•
•
5.6. Repairs
Any repairs that may be required must be carried out by a HTC
Service Centre, which has trained service personnel and uses
HTC original parts and accessories. Contact your retailer if your
machine requires servicing. For contact information, see Contact
Information at the start of the manual.
5.7. Spare parts
To ensure rapid delivery of spare parts, always specify the model,
the machine's serial number and the spare part number when
ordering. Information on the model and serial number can be found
on the machine's name plate.
Information on spare part numbers can be found in the machine's
spare parts list which is available to read or print out from the
accompanying digital media or HTC's website:
24
Check the grinding holders. Remove the tools and run
the machine in the air at the lowest speed. If the grinding
holders oscillate or wobble significantly, they are damaged.
Check that the upper belt is undamaged. Try to turn the
large disc in one direction. It should be quite stiff. If it turns
freely, the belt has come off.
Tighten anything that may have vibrated loose.
Remove the grinding cover and check that it is
undamaged.
Check the upper belt. Replace, if necessary.
Check the seals on the shafts that the upper belt runs on.
Replace, if necessary.
Scrape and vacuum-clean the parts shielded by the grinding
cover.
Test run and listen for any dissonance from the bearings.
HTC 420 VS
3.0