HTC Touch Dual HTC Touch Dual Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для КПК HTC Touch Dual HTC Touch Dual. HTC Touch Dual HTC Touch Dual 2 страницы. Htc touch touch dual: quick start
Также для HTC Touch Dual HTC Touch Dual: Прочитай меня сначала (2 страниц), Руководство по установке программного обеспечения (5 страниц), Прочитай меня сначала (2 страниц)

HTC Touch Dual HTC Touch Dual Краткое руководство по эксплуатации
Before Using Your Device
C. Install the battery
Install the battery by inserting
it with its exposed copper part
A. Remove the back cover
aligned with the protruding
copper conductor on the
Hold the device in place
lower-right side of the battery
with one hand and
compartment.
with your other hand's
thumb or finger, lift up
Insert the bottom side of the
the bottom of the back
battery first, then gently push
cover.
the battery into place.
Lift from here.
D. Replace the back cover
B. Install the SIM Card
Insert the SIM card with the
gold contacts facing down
Cut corner of
and the cut corner on the
SIM card
outside
2
1
Pull back the red
rubber cover.
3
Close the red rubber door.
The Touch Phone
HTC Home
HTC Home™ is a Today screen plug-in that gives you up-to-date
local information at a glance, such as time, date and weather
Earpiece
Second Camera
information, and shows new messages and missed calls. It also
has a customizable launcher where you can add your favorite
applications for one-touch access and a Profile selector where
you can quickly change the profile or ring tone of your device.
Touch Screen
Navigation
Control /
ENTER
Talk
microSD™
End
card slot
16-key
Camera
Keypad*
button
* Slide up the front panel to
reveal the keypad.
E. Charge the battery
The battery is not fully charged out of the box. To charge
2
the battery inside your device, connect the AC adapter
Copper conductor
plug to an electrical outlet and connect the USB end to the
1
Sync connector on the left side of your device. The battery
is fully charged after about 3 hours of charging.
Secure the top part of the
1
back cover by "locking" it into
3 openings on the device.
F. Power on/off the device
Press and hold the POWER button
2
Press the middle
for about 3 seconds to power on
portion of the back
your device.
cover
When powering off, a confirmation
message will be displayed. Tap Yes
3
Press the bottom part of the
to power off the device.
back cover to lock it into place.
You should hear a click.
TouchFLO™
TouchFLO™ gives you better touch panel experience on your
device. Using TouchFLO, you can easily scroll and pan the screen
by sliding your finger on the touch panel. TouchFLO also has the
Touch Cube where you can add your favorite contacts, access
media, launch programs, and more.
Finger scrolling
While on a Web page, document, or list (such as contacts list, file list, etc.),
slide your finger upward to scroll down; slide your finger downward to
scroll up.
To scroll to the right, slide your finger to the left. To scroll to the left, slide
your finger to the right.
Finger panning
Touch and hold on the touch screen and then drag your finger around
the screen.
Touch Cube
To open the Touch Cube, slide your finger
upward, starting from the bottom of the
touch screen where it shows a logo image.
To close the Touch Cube, slide your finger
downward.
Touch Cube is a three-dimensional, cubic
user interface. To flip the interface from one
side to another, slide your finger left or right
on the touch screen.
Quick Setup Wizard
When you power on your device for the first time, a Quick Start Wizard will guide you through
touch screen calibration, provide a quick tutorial on stylus operation and pop-up menus, and
allow you to set the date, time, and a device password.
Follow the on-screen instructions to complete the wizard.
Configure Data Connections
When you start up your device with a SIM card installed, you see a notification message from the
Connection Setup on the Today screen. Connection Setup can help you automatically set data
connection settings such as GPRS/3G, MMS, and WAP. Setting up your GPRS/3G connection lets
you surf the Web while on the go.
1
When you see the notification message from the Connection Setup, tap Yes.
Note
If your SIM card supports multiple network operator profiles, a message will appear with network
profile choices. Select the profile you want to use and tap OK.
2
Connection Setup then starts to configure your device's data connection settings.
3
After the Connection Setup completes the configuration, tap Restart.
Opening the Touch Cube
Use Internet Explorer® Mobile (tap Start > Internet Explorer) to surf the Web.
Synchronize Your Device and Computer
Synchronize your device with your computer to keep information such as Outlook e-mails,
contacts, tasks, and appointments up-to-date on your device.
Set up synchronization software on your computer
Depending on the Operating System of your Computer, you will need either Microsoft
ActiveSync® 4.5 (or later) or Windows Mobile® Device Center to synchronize your device with
your computer.
Set up ActiveSync on Windows XP
Set up Windows Mobile Device
Center on Windows Vista®
Install ActiveSync 4.5 on your computer
1
from the Getting Started Disc.
Connect your device to your
1
computer. In Windows Mobile Device
Center, click Set up your device.
2
Connect your device to your computer.
The Synchronization Setup Wizard
automatically starts and guides you to
create a synchronization partnership. Click
Next to proceed.
3
To synchronize your device with your
computer, clear the Synchronize
directly with a server running Microsoft
Exchange check box and click Next.
2
Select the information you want to
synchronize and click Next.
Select the information types that you want
4
to synchronize, then click Next.
5
Choose whether to allow wireless
connections while your device is
connected to the computer.
3
Type a name for your device and click
Set Up.
6
Click Finish.