Dickinson 1000 Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Газовый обогреватель Dickinson 1000. Dickinson 1000 15 страниц. Propane cozy cabin heater
Печатать страницуTROUBLESHOOTING
Contact Dickinson Marine directly, or consult your dealer, if the following suggestions do
not resolve the difficulty.
Gas Smell
1. Extinguish all open flames and smoking materials, close both manual and solenoid
cylinder valves immediately. Make sure that the appliance valve is closed.
2. Ventilate all interior compartments thoroughly. Maintaining as much ventilation as
possible, open cylinder valves. Make sure that the appliance valve is still closed.
Apply a mixture of liquid detergent and water to all connections, checking for bubbles
indicating a leak. Do not use a flame to check for leaks.
3. When repair of the leak(s) has been completed, test the system with the aid of the
pressure gauge.
Inadequate Heat - Flame Burning Low or Gas Out
1. Your system may be low on fuel - check your tank pressure gauge.
2. The gas cylinder valve may not be fully open - make sure the handle is turned as far as
it will go in the counter-clockwise direction.
3. The burner orifice may be obstructed. Let the burner cool, then remove the 4 machine
screws (2 each side) which secure the burner and valve assembly to the heater body.
Remove burner assembly, take off the burner cap, and remove the orifice ( you will
require a long 7mm or 9/32" socket or nut driver). Clean out the orifice and reinstall
the part.
4. LPG gas will not flow as readily if the outside temperature is very low, ie. below
freezing. There is not much you can do about this condition until the propane
cylinder locker warms up.
Ignition System Fails to Spark
5.
Check that the ignition lead is connected to the spark plug.
Inspect the ignition lead from the valve to the spark plug, ensuring that the lead is not
shorting out before reaching the spark plug.
Clean the spark plug electrode to ensure a strong spark is evident. Brass wool or light
grit sandpaper work well.
www.dickinsonmarine.com
Form#7.2-70 Issue#2
~