BIONIME Rightest GD500 Руководство по началу работы

Просмотреть онлайн или скачать pdf Руководство по началу работы для Медицинское оборудование BIONIME Rightest GD500. BIONIME Rightest GD500 2 страницы. Lancing device
Также для BIONIME Rightest GD500: Инструкция по применению (2 страниц)

Печатать страницу

GETTING STARTED GUIDE

Up Button

(

)

Down Button

(

)

Display Window

Front View of Meter

Sample Entry

Test strips

View Window

Test Strips

Test strips vial

Control Solution

Batteries Installation

Turn the meter over. Press and push battery

cover to open. Install both batteries at once.

Be sure to put battery in correct direction.

( For self-testing )

Test Strip Port

Smart Code Key

Release Button

Main Button (

)

Press to turn on/off

meter or go into

setting model.

Battery Cover

Back View of Meter

Depth adjustable cap

Release button

Lancet carrier

Safe switch

Hub

Lancing Device

Protective cover

Check Key

Smart Code Key Installation

1) With the Meter off, follow ① and ② direction

to put the new Smart Code Key into the track

on code key base.

2) Push down the Smart Code Key until it snaps

into the Smart Code Key base.

Setting Up Your Meter - Setting the Date, Time and Unit

1) Press and release main button "

2) Press and hold main button "

you go into setting mode, you will see power off first. Please keep pressing it until you go into

the setting mode. The year will flash.

3) Press up button "

4) Press main button "

5) Repeat steps 3 and 4 to change the date, time format, hour, minute and measurement unit.

After pressing the main button to confirm the measurement unit, your set-up has been finished.

Plunger

Lancet

Preparing the Lancing Device

1) Hold the adjustable cap in one hand and hold the hub in the other hand. Bend the cap towards the

down side. When a gap appears between the cap and hub, pull them off in opposite directions.

2) Pull off the depth adjustable cap.

3) Insert a new disposable lancet firmly into lancet carrier.

" to turn on the Meter.

" for five seconds until you go into the setting mode. Before

" or down button "

" to change the year.

" to confirm the year and move to month setting.