Alpha ESS M4856-P Руководство по быстрой установке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Блок управления Alpha ESS M4856-P. Alpha ESS M4856-P 7 страниц. Battery module
Печатать страницуPositive power line wiring
Step7
DIP Switch
Step10
Communication board DIP switch configuration:
Confirm that the battery closest to the inverter is
1
number 1 battery and so on. The maximum
number of parallel batteries is 6.
2
The direction of the last DIP switch of the battery
is configured according to the black mark
position of the No. 6 figure, that is, the last
battery dial switch 2 is up and the other battery
dial switches are all down.
When the number of batteries is between 2 and
3
6 sets, the dial switch configuration is operated
according to the sequence.
Negative power line wiring
Step8
Connect Communication Line
Step9
Mounting Appearance Parts
Step11
The mode of disassembly of step 2 of restoration:
A
Pull the top two guide rods into the housing.
B
Press the buckle from the middle of the bottom.