Alpha Image AMD1B-E Series Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Alpha Image AMD1B-E Series. Alpha Image AMD1B-E Series 2 страницы. Amd1x-e series ir dome camera

Печатать страницу

PRODUCT BRIEF

* * * * Sensor ( ( ( ( C CD ) ) ) )

SONY 1/3

Effio-E CCD Sensor.

* * * * Auto Gain Control (AGC)

Built-in auto gain control (AGC) circuit. This camera

produces a high definition picture in low Lux condition.

* * * * Scanning Mode

PAL

* * * * OSD SETTING

MANUAL

LENS

TYPE:DC / VIDEO

AUTO

MODE:CLOSE / AUTO / OPEN SPEED:0-255

HIGH LUMINANCE MODE: SHUT+AUTO IRIS /

BRIGHTNESS: 0—255

AUTO

LOW LUMINANCE MODE: OFF / AGC

SHUTTER/

BRIGHTNESS: ×0.25, ×0.5, ×0.75, ×1

AGC

MODE: SHUT+AGC

SHUTTER:1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,

MANUAL

1/4000, 1/10000

AGC:6, 12, 18, 24, 30, 36, 42, 44.8

ATW

SPEED/DELAY CNT/ATW FRAME/ENVIRONMENT

WHITE BAL

PUSH / ANTI CR / PUSH LOCK / USER1 / USER2 / MANUAL

BACK LIGHT

OFF / BLC / HLC

PICT AD-

MORROR/BRIGHTNESS/CONTRAST/SHARPNESS/HUE/GAIN

JUST

OSD SET

OFF

ATR

LUMINANCE / CONTRAST

OFF

MOTION

DET

DETECT SENCE / BLOCK DISP / MONITOR AREA /

AREA SEL / TOP / BOTTOM / LEFT / RIGHT

OFF

PRIVACY

AREA SEL / TOP / BOTTOM / LEFT / RIGHT /

COLOR / TRANSP / MOSAIC

COLOR

B/W

BURST: OFF/ON

DAY/NIGHT

BURST: OFF/ON

AUTO

DELAY CNT / DAY-NIGHT / NIGHT-DAY

MODE: Y/C, OFF, Y, C

CAMERA ID

OFF/ON

SYNC

INTERNAL

ENGLISH / CHINESE / JAPANESE / ESPANOL / PORTU-

LANGUAGE

GUES / PYCCKNN / FRANCAIS / DEUTSCH

CAMERA RESET / BACK / EXIT / SAVE ALL

CONNECTING

KEY BOARD

LEFT

DOWN

AUTO IRIS

TROUBLESHOOTING

1. No Picture after providing power

. Maybe your power supply is not a 12 VDC Device. Maybe the polarity +/- is

incorrect according to the schematic above . P lease check.

. Please check if all the connections are made in a proper manner like in the

schematic above. Monitor, power supply and connectors with the appro-

priate cabling according to the industry standard.

2. The picture level direction have flowing interference ripples

. May be caused by power supply AC ripples, it needs filtering of the waves of

the power supply. May be caused by ground loops.

. Check the monitor and peripheral equipments used.

3. The picture background color changes continuously

. Fluorescent lamp's electromagnetic field causes color roll. This is a proper

phenomenon of cameras in general.

. Reduce the number of fluorescent lamps or increase the distance between

the camera and the fluorescent lamps.

. Use power supply external synchronisation.

4. Too much picture smear is seen in the image

. The power supply's voltage is unstable .

. Please check the connecting cables, maybe they are not well fitted.

● T he power supply must have a legal safety attestation. Its output

voltage, current, voltage polarity and operating temperature must

match the camera's requirement .

● W hen using the camera in bad wheather conditions (eg. lightning) , p ls

note to use a surge protection device or put out the PSU plug & cable .

● I n order to produce high quality pictures, the power supply's cable and

video output cable should not be too long.

Monitor

AMD1x-E

Link wire rule

：

RIGHT

Video

Power

PRESS

12 VDC Power Supply

Notes

：：：：

INTRODUCTION

Congratulations on your purchase of this product.

This User Guide suits AMD1x-E product. We use the lat-

est SONY sensor and driver in this product. This camera

Video

is very small and robust, so it can be used in almost any

condition. In addition, it has a very high quality and stabil-

ity, strong anti-jamming, and produces rich and real colors.

Also the installation is very easy, you don't have to open

the camera to mount it and set it up, the setup is all done

12 VDC

externally.

Please read this instruction manual carefully to en-

sure proper use of the product.

To prevent fire or shock hazards do not expose the unit

to rain or moisture.

If you don't want to use this product or it is faulty, do not

throw it away. Please return it to your original supplier for

proper recycling or disposal. Think of the environment !

This symbol is intended to alert the user to the presence of

uninsulated 'dangerous voltage' within the product's

enclosure that may be of sufficient power to cause a risk

or electric shock to persons.

RISK OF ELECTRIC SCHOCK DO NOT OPEN

CAUTION:

SHOCK DO NOT REMOVE THE COVER OR BACK. THERE ARE NO

USER SERVICEABLE PARTS INSIDE. PLEASE REFER TO QUALI-

FIED PERSONAL IF THERE IS A PROBLEM WITH THE CAMERA.

CAUTION:

TO PREVENT ELECTRIC SHOCKS AND RISK OF

FIRE HAZARDS, DO NOT USE AN OTHER THAN THE

SPECIFIED POWER SOURCE.

Note : : : :

● Please note the camera's operating temperature and its envi-

ronment requirement. Avoid using the camera at too high or too

low temperatures. The operating temperature is -30 ~

(Recommendatory operating temperature is -10 ~ +50 .)

● Never make the camera face the sun or a very bright object. It

might damage the CCD sensor.

● Don't mount the camera near any heating source (eg. radiator).

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

6 0 .