Alpha Microsystems AM-212-20 Руководство по установке - Страница 11
Просмотреть онлайн или скачать pdf Руководство по установке для Компьютерное оборудование Alpha Microsystems AM-212-20. Alpha Microsystems AM-212-20 18 страниц. Scsi 3-1/2” floppy diskette drive
Печатать страницуInstallation Instructions: AM-212-20 3-1/2" Floppy Diskette Drive
Adding the Device Driver to System Memory
You must load the driver into system memory. For the AM-212-20 diskette drivers you must also specify
the diskette format and density on the
cause the driver to use the default values for a high density (1.44MB) native AM-SCSI format diskette.
The
SYSTEM
command line has the following format for the AM-212-20 diskette drivers:
SYSTEM driver/N /F:format /D:density cache-size flush-time
format can be:
AMOS
DOS
SCSI
density can be:
720
1.44
cache-size
flush-time
Only the first character of the switch value shown above is required. However, using the full switch name
makes the command line more understandable. Spaces are not allowed within the switch strings.
Add
SYSTEM
statements similar to these before the final system command:
SYSTEM FLH.DVR[1,6]/N /F:SCSI /D:1.44 200K 1
;
;load AM-SCSI high density driver and initialize write
;cache with a 200KB buffer and a 1 second maximum
;time between buffer flushes
SYSTEM FLD.DVR[1,6]/N /F:SCSI /D:720
;
;load AM-SCSI double density driver without write cache
PDI-00212-20-00, Rev. A01
Diskette Format
AMOS 720KB
AMOS 1.44MB
PC 720KB
PC 1.44MB
AM-SCSI 720KB
AM-SCSI 1.44MB
SYSTEM
traditional AMOS compatibility format
MS-DOS format
AM-SCSI format
720 KB double density
1.44 MB high density format
is the size of the write cache buffer for those formats that
support write caching and is ignored for those formats that don't.
is the maximum number of seconds to wait before forcing
cached data to be written to the diskette. One (1) second is
recommended for the AM-212-20 diskette.
Bitmap Size
90
180
90
180
89
179
command line. Failure to specify this information will
Page 7