Epever LS1012E Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Контроллер Epever LS1012E. Epever LS1012E 20 страниц. Solar charge controller
Также для Epever LS1012E: Руководство (2 страниц)

Печатать страницу

1. Table of Contents
1. 1 Important Safety Information
2. 2 General Information
3. 3 Installation Instructions
3. Mounting
3. Wiring
4. 4 Operation
4. LED Indicators
4. Setting Operation
5. 5 Protection and Troubleshooting
5. Protection
5. Troubleshooting
6. 6 Technical Specifications

3.2Wiring

1. Connect components to the charge controller in the sequence as

shown in above picture and pay much attention to the "+" and

"-".Always power the battery First.

2. After power the battery, check the battery indicator on the

controller, it will be green. If it's not green, please refer to chapter

3. The load should be DC applicant with the same rated voltage as

battery's. Controller offers power to loads through the battery

voltage.