Alpha Networks SNX-60x0-486F Series Руководство по быстрой установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Переключатель Alpha Networks SNX-60x0-486F Series. Alpha Networks SNX-60x0-486F Series 6 страниц. Data center switch

Печатать страницу
Quick Installation Guide
The figure below illustrates how to install the
frontal rack-mount brackets onto the switch.
1.
Place the switch on a flat horizontal surface.
2.
Position the frontal rack-mount bracket over the screw
holes on the side of the switch. The ears of the bracket
must be facing forward and outwards.
3.
Use the frontal rack-mount screws and the Phillips-
head screwdriver to fasten the bracket onto the side of
the switch.
4.
Repeat steps 1 to 3 for the other frontal rack-mount
bracket on the other side of the switch.
Figure 2 - Front Rack-Mount Bracket Installation
The figure below illustrates how to install the rack-
mount slider brackets onto the rack-mount unit.
5.
Take one rack-mount slider bracket and position it over
the screw holes, on the back of the rack-mount unit, at
the appropriate height. The ears of the bracket must be
facing backwards and outwards.
6.
Use the rack-mount unit screws and the additional
screwdriver to fasten the bracket onto the back of the
rack-mount unit.
7.
Take the second rack-mount slider bracket and repeat
steps 1 and 2, on the opposite side of the back of the
rack-mount unit. Make sure to horizontally align the
two rack-mount slider brackets.
Figure 3 - Attach rack-mount slider brackets to rack
The figure below illustrates how to mount the switch
onto the rack-mount slider brackets.
8.
Position the switch so that the rack-mount slider
brackets align horizontally within the two rows of rack-
mount slider bracket pegs found on the side panel of
the switch.
SNX-60x0-486F Series Data Center Switch
9.
Slide the switch carefully backwards so that the rack-
mount slider brackets fit into the space between the
two rows of rack-mount slider pegs.
Figure 4 - Slide switch into position
The figure below illustrates how to complete the
rack-mount installation.
10. Use the rack-mount unit screws and the additional
screwdriver to fasten the frontal rack-mount brackets
onto the front of the rack-mount unit.
Figure 5 - Slide switch into position
Installing Transceivers into the
Transceiver Ports
Switches in this series have 48 SPF+ ports and 6
QSFP+ ports. QSFP+ technology allows a smooth
transition from 10 to 40 Gigabit Ethernet
infrastructures in data centers. Each of the switch's
QSFP+ ports can operate in either native 40 Gigabit
Ethernet mode or 4 x 10 Gigabit Ethernet mode.
This switch supports both fiber and copper cabling
solutions for these two modes.
3