Axis AXIS 207 Руководство по установке - Страница 3
Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для фотоаппаратов Axis AXIS 207. Axis AXIS 207 13 страниц. True bandwidth-efficient mpeg-4 network cameras
Также для Axis AXIS 207: Технические характеристики (6 страниц), Технические характеристики (2 страниц), Технические характеристики (2 страниц), Технические характеристики (2 страниц), Информационный лист (2 страниц)
Печатать страницу
AXIS 207/207W/207MW Installation Guide
LED indicators
Unlit
Wireless
Green
Red
Amber
Network
Green
Unlit
Green
Unlit
Status
Amber
Red
Green
Power
Amber
Hardware installation
Important!
The AXIS 207/207W/207MW is designed for indoor use only, and must always be positioned where it is not
exposed to direct sunlight or strong halogen light, which can cause permanent damage to the camera's
image sensor. Damage as a result of exposure to strong light is not covered by the Axis warranty.
Wall mounting
1. If required, use the 3 supplied screws to fix the base
plate to a flat (horizontal or vertical) surface.
2. To use a shorter stand, unscrew the lock ring to release
the camera, and remove the extension section.
3. Attach the camera, adjust the angle and tighten the lock
ring.
Shelf mounting
1. Position the clamp and tighten the fixing screw securely.
2. Attach the clamp to the lock ring on the camera.
3. Adjust the angle and tighten the lock ring.
Wired mode.
Steady for connection to a wireless network. Flashes for network activity.
Steady for no wireless network connection. Flashes when scanning for wireless networks.
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
No wired network connection, or AXIS 207W/AXIS 207MW in wireless mode.
Steady for normal operation. Can be configured to flash green at intervals whenever the
camera is accessed. See the online help for more information.
When configured for "no flash" on camera access.
Steady during startup, reset to factory default and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Page 5