EPH Controls CP4M Инструкция по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Термостат EPH Controls CP4M. EPH Controls CP4M 4 страницы. Hardwired open therm room thermostat
CP4M Room Thermostat
Hardwired Open Therm®
5. Adjusting the program settings for 5/2d
Programming for Saturday to Sunday is now selected.
Press the
or
buttons to adjust the P1 time. Press the 'OK' button.
Press the
or
buttons to adjust the P1 temp. Press the 'OK' button.
Repeat this process to adjust P2 to P6 times and temperatures.
Press the 'AUTO' button to return to automatic mode.
While in PROG Mode pressing the 'PROG' button will jump from P1-P2 etc
without changing the temperature.
While in PROG Mode pressing the 'TIME' button will jump to the next day
(block of days).
If 7 D mode is selected, you can program each day of the week with 6
individual times and temperatures.
If 24H mode is selected, you can only program each day of the week with
the same 6 times and temperatures.
6. Copy function
Copy function may only be used if the thermostat is in the 7d mode.
Set the times and temperatures for the day that you wish to copy from in
PROG Mode.
When still on the day press the 'COPY' button.
The day of the week that you have selected will be shown with 'COPY'
below it.
The next day will begin to ash on the top of the screen.
Press the
button to copy the times and temperatures to that day.
Press the
button to skip a day.
You can copy to multiple days using the
Press the 'OK' button when copying has been completed.
7. Temporary override
When in AUTO mode, press the
temperature setpoint.
'OvEr' will appear on the screen.
Press 'OK' or after 5 seconds the thermostat will operate in this temporary
override, util the next switching time.
To cancel temporary override, press the 'OFF' buttton and then press the
'AUTO' button to return to the automatic mode.
8. Permanent override
Press the 'MAN' button to enter Manual Mode (Permanent Override).
'MAN' will appear on the screen.
Press the
or
buttons to adjust the temperature setpoint.
Press 'OK' to con rm the temperature selection or after 5 seconds the
thermostat will operate in this permanent override.
The thermostat will operate in MAN mode until the mode is changed.
To cancel permanent override, press the 'OFF' button and then press the
'AUTO' button to return to automatic mode.
(Continued)
button.
or
buttons to adjust the
EPH Controls Ireland
[email protected] www.ephcontrols.com
Boiler
Plus
Page 2 of 4
Operating Instructions
9. Boost function
The thermostat can be boosted to a speci c temperature for 1, 2 or 3 hours
while the thermostat is operating in all modes except for holiday mode.
Press the 'BOOST' button 1, 2 or 3 times, the time that the boost will be
activated to will ash on the screen.
If you do not press any other button the boost will activate to the
temperature displayed on the screen after 5 seconds.
If you press the 'OK' button the temperature will now ash. You can edit the
temperature if you press the
Press the 'OK' button or wait for 5 seconds to enter BOOST Mode.
'BOOST TO' will now be displayed on the screen with the time that it is
activated to displayed above this text.
Press the 'BOOST' button again to deactivate the boost.
10. Holiday function
This will switch your heating system o between the start and end times
you select .
Press the 'HOL' button, 'HOLIDAY FROM' will appear on screen.
Press the
or
buttons to adjust the year.
Press the
or
buttons to adjust the month. Press the 'OK' button.
Press the
or
buttons to adjust the day.
Press the
or
buttons to adjust the hour.
'HOLIDAY TO' will appear on screen.
Press the
or
buttons to adjust the year.
Press the
or
buttons to adjust the month. Press the 'OK' button.
Press the
or
buttons to adjust the day.
Press the
or
buttons to adjust the hour.
The thermostat will now return to the mode it was in before the Holiday
settings were entered.
To cancel Holiday mode, press the 'HOL' button.
11. Keypad lock and unlock
To lock the keypad, press and hold the
will appear on the screen. The keypad is now locked.
To unlock the keypad, press and hold the
will disappear from the screen. The keypad is now unlocked.
12. Backlight mode selection
There are two settings for selection. The factory default setting is AUTO.
OFF
The backlight is permanently OFF.
AUTO
On pressing any button the backlight stays on for 5 seconds.
ON
The backlight is permanently ON.
To adjust the backlight setting, lower the cover on the front of the unit.
Press the 'OK' button for 5 seconds.
Press either the
or
Press the'OK' button.
13. Frost protection
Frost protection is built into this thermostat.
It is pre xed at 5°C and is not adjustable.
It will only be activated when the thermostat is in the OFF mode and the
room temperature falls below 5°C.
EPH Controls UK
[email protected] www.ephcontrols.co.uk
or
buttons.
Press the 'OK' button.
Press the 'OK' button.
Press the 'OK' button.
Press the 'OK' button.
Press the 'OK' button.
Press the 'OK' button.
OFF
and
buttons for 10 seconds.
and
buttons for 10 seconds.
AUTO
buttons to select the OFF, AUTO or ON mode.
5°C
20190930_CP4M_OpIns_JW