EPH Controls CRTP2 Инструкция по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Термостат EPH Controls CRTP2. EPH Controls CRTP2 3 страницы. Battery operated
Печатать страницу
CRTP2 Room Thermostat
8. Resetting the thermostat
It is necessary to reset the thermostat prior to initial programming.
Press the
button on the side of the thermostat.
RESET
'NO' will appear on the screen.
Press the
button.
'YES' will appear on the screen.
Press the 'OK' button to return to normal operation.
9. Keypad lock and unlock
To lock the keypad, press and hold the
will appear on the screen. The keypad is now locked.
To unlock the keypad, press and hold the
will disappear from the screen. The keypad is now unlocked.
10. Setting the date, time and operating mode
Set
Press the
button once. 'Set Date Year' will appear on the screen.
Press the
or
buttons to adjust the year.
Press the
or
buttons to adjust the month.
Press the
or
buttons to adjust the day.
Press the
or
buttons to adjust the hour.
Press the
or
buttons to adjust the minute.
Press the
or
buttons to adjust from 5/2d to 7d or 24h mode.
Press the
button or wait 10 seconds and the thermostat will return to
normal operation.
11. Factory program setting
P1
P2
Mon-Fri
21˚C
18˚C
08:00
10:00
Sat-Sun
21˚C
18˚C
P1
P2
Mon-Fri
21˚C
18˚C
08:00
10:00
Sat-Sun
21˚C
18˚C
P1
P2
Everyday
21˚C
18˚C
Battery Operated
OFF
and
buttons for 10 seconds.
and
buttons for 10 seconds.
Press the 'OK' button.
Press the 'OK' button.
Press the 'OK' button.
Press the 'OK' button.
Press the 'OK' button.
5 / 2d
5/2D
P3
P4
P5
21˚C
18˚C
21˚C
12:00
14:00
17:30
23:00
21˚C
18˚C
21˚C
7D
P3
P4
P5
21˚C
18˚C
21˚C
12:00
14:00
17:30
23:00
21˚C
18˚C
21˚C
24H
P3
P4
P5
21˚C
18˚C
21˚C
EPH Controls Ireland
[email protected] www.ephcontrols.com
12. Adjusting the program settings for 5/2d
Set
Press the
button twice.
Programming for Monday to Friday is now selected.
Press the
Press the
Repeat this process to adjust P2 to P6 times and temperatures.
Set
Press the
Programming for Saturday to Sunday is now selected.
Press the
Press the
Repeat this process to adjust P2 to P6 times and temperatures.
Press the
If 7 D mode is selected, you can program each day of the week with 6
individual times and temperatures.
If 24H mode is selected, you can only program each day of the week with the
same 6 times and temperatures.
13. Temporary override (Manual)
In this mode the thermostat will switch to the temperature set by the user
until the next program is activated.
Press the
'Manual' will appear on the screen.
Press 'OK' or after 10 seconds the thermostat will operate in this
temporary override.
Press the
14. Permanent override (Hold)
In this mode the thermostat will operate to the temperate set by the user.
Hold
Press the
button. 'Hold' will appear on the screen.
Press the
and
Press 'OK' or after 10 seconds the thermostat will operate in this
permanent override.
Press the
button to return to automatic mode.
P6
15. Adjusting the switching di erential
16˚C
Press the 'OK' and 'Hold' buttons for 5 seconds.
16˚C
'0.4˚C' will appear on the screen.
Press the up or down buttons to adjust from 0.2, 0.4, 0.6, 0.8 or 1C.
P6
Press the
16˚C
16. Replacing the batteries
16˚C
Slacken the fastening screw on the bottom of the thermostat with a
P6
philips head screwdriver.
16˚C
The thermostat is hinged and can be opened 180 degrees.
Replace the batteries with 2 x AA Alkaline batteries.
Close the thermostat and tighten
the fastening screw.
EPH Controls UK
[email protected] www.ephcontrols.co.uk
Page 2 of 3
Operating Instructions
and
buttons to adjust the P1 time.
and
buttons to adjust the P1 temp. Press the 'OK' button.
button.
and
buttons to adjust the P1 time.
and
buttons to adjust the P1 temp. Press the 'OK' button.
button to return to automatic mode.
and
buttons to adjust the temperature setpoint.
button to return to automatic mode.
buttons to adjust the temperature setpoint.
button to return to normal operation.
Press the 'OK' button.
Press the 'OK' button.
0.4˚C
20191015_CRTP2_OpIns_JW