DieHard 200.71221 Руководство пользователя - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя для Зарядное устройство DieHard 200.71221. DieHard 200.71221 11 страниц. Battery charger 10/2 amp manual
Печатать страницу
Before Using Your Battery Charger
It is important to understand your charger's requirements. This section will tell you about your charger's electrical
requirements and how to prepare a battery for charging.
Plugging
it in
Electrical Shock Hazard
Be sure that power cord fits properly into outlet.
If not, have a qualified technician install a proper
outlet. Never alter the AC cord or plug provided.
Improper connection can result in electrical shock.
Your charger should be grounded to reduce the
risk of electrical shock.
Your charger is equipped with an electrical cord that
has an equipment grounding conductor and a ground-
ing plug designed to be used on a 120 volt circuit. The
plug must be plugged into an outlet that has been
properly installed and grounded in accordance with all
local codes and ordinances.
A TEMPORARY
adapter may be used to connect the
charger to a two-pole outlet if a properly grounded
outlet is not available. Use the adapter ONLY until a
propedy grounded outlet can be installed by a qualified
electrician.
WARNING: Improper adapter con-
nection can result in electrical shock.
Before using an adapter as illustrated, be certain that
the center screw of the outlet plate is grounded. The
green colored grounding clip of the adapter must be
attached by a metal screw to a propedy grounded
outlet. If unsure whether outlet is properly grounded,
contact a professional electrician. If necessary, replace
the original outlet cover screw with a longer one that
will secure the grounding clip to the outlet cover and
make a ground connection to the grounded outlet.
Using an extension
cord
The use of an extension cord is not recommended. If
you must use an extension cord, please make sure
that you follow these guidelines:
• Make sure the pins on the plug of the extension cord
are the same number, size, and shape as those of
the plug on the charger.
• Use only 3-conductor (grounded) extension cord
when necessary.
• Check that the extension cord is properly wired and
in good electrical condition.
• Make sure that the wire size is large enough for its
length and for the AC ampere rating as specified in
the accompanying chart.
Length of Cord, In Feet
AWG* Size of Cord
*AWG=Amertclm
W}re Gauge
4