DieHard 200.71487 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Дистанционное пусковое устройство DieHard 200.71487. DieHard 200.71487 9 страниц. Jump starter and dc power source
Печатать страницу
1. Check t heinternal battery's c harge
level b ypressing theswitch marked
DISPLAY. TheDigital D isplay w ill
show thebattery's percentage.
NOTE:Internalbattery'sstatus
Display i s mostaccurate when the
Portable Power 950 has been discon-
nected f rom alldevices and charging
sources foratleast 3 0minutes.
2. Using a proper extension cord, c on-
nect t hecord tothecharge p lug and
thenplugthe cordintoa properly
wired and live110Vac/60Hz
wall o ut-
let.
CAUTION: Operating t hePortable
Power 950while theinternal battery
isbeing charged m ay cause perma-
nent d amage totheunit.
3. Whilethe Portable Power 9 50is
charging, thebattery's p ercentage
ofcharge wiltbedisplayed. When
theinternal battery is fullycharged
thedisplay w illshow 100. C omplete
charging m ay takeupto 72hours.
The Portable Power 950 isthen ready
touse.
4. Once the battery is fullycharged,
the built-incharger a utomatically
switches t o float-mode monitoring,
which t rickle charges thebattery a nd
keeps itfullycharged w ithout over-
charging sothePortable P ower 950
may beleftpermanently
connected
tothewalt o utlet.
The internal battery m ay also becharged
while youdriveusing themale-to-male
accessory c able(available separately,
see "Accessories
and Replacement
Parts"
section ofthismanual). Insert o neend
oftheaccessory cable intothe12VDC
power o utlet a ndtheother e ndintothe
vehicle's accessory outlet (lighter socket).
Completely disconnect theaccessory
cable when theengine isnotrunning.
STORAGE
AND iNTERNAL
BATTERY
SELF-DISCHARGE
Charge the 950 internal battery before first
use and after every use thereafter.
The internal battery will gradually self-dis-
charge (lose power) over time, especially
in warm environments. Leaving the battery
in a discharged state may result in perma-
nent battery damage. To ensure satisfac-
tory performance
and avoid permanent
damage, charge the internal battery every
2 to 3 months. The Portable Power 950
may be left permanently connected to the
AC walt outlet. Store in a cool dry place.
REPLACING
THE
BUILT-IN
LIGHT
To replace the built-in light bulb:
1.
Turn the light off.
2.
Pop out the protective
plastic lens
cover.
3.
Gently
grasp
the bulb and twist
counter-clockwise
one quarter-turn
to unscrew the bulb.
4.
Insert a replacement bulb of the same
type and rating, and twist clockwise
one quarter-turn
to screw in the new
bulb.
5.
Replace the tens cover.
6.
Test the light by switching the light on
and off.
CUSTOMER
TECHNICAL
ASSISTANCE
Customer technical assistance is available
Monday-Friday,
7 am to 4:30 pm Central
Time by phoning 1-800-SEARS-64.