EPHESUS Stadium Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для DJ оборудование EPHESUS Stadium. EPHESUS Stadium 16 страниц. Stadium series

Step 3 – Make Electrical Connections

Never connect the luminaire to an electrical system that is not grounded. Installing a luminaire in an ungrounded

electrical system could allow the metal housing to become energized in the event of an electrical short, resulting in

the risk of electrical shock for anyone who comes into contact with the fixture. FAILURE TO FOLLOW THIS WARNING

MAY LEAD TO DEATH, SEVERE INJURY, OR PROPERTY DAMAGE.

Equipment Required:

Philips screw driver

●

Electrical splicing connectors. For all outdoor installations, silicone filled water resistant connectors are highly

●

recommended (i.e. waterproof wire nuts that pass UL ratings).

Power wiring

Wiring connections:

Connect the luminaire power whip to incoming power wires or the plug. See the table below for the color designation.

●

Luminaire power wire color

Black

White

Green

Table 5. Power wiring connections

NEVER connect the bare or green insulation ground wire to the black (HOT) current-carrying or white (NEUTRAL)

supply wire, as this could energize the metal housing and create the risk of electrical shock. FAILURE TO FOLLOW

THIS WARNING MAY LEAD TO DEATH, SEVERE INJURY, OR PROPERTY DAMAGE.

Control XLR In/Out

Figure 5. Electrical Connections

Designation

Line

Line or Neutral

Ground

Installation Instructions - Stadium Series

WARNING

EATON

IB528002EN

Power Whip

Installation instructions rev 20171011