DieHard Portable Power 1150 Руководство по эксплуатации - Страница 16
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Дистанционное пусковое устройство DieHard Portable Power 1150. DieHard Portable Power 1150 17 страниц. Diehard portable power 1150 battery charger operator's manual
Также для DieHard Portable Power 1150: Руководство пользователя (11 страниц), Руководство по эксплуатации (16 страниц), Руководство по эксплуатации (15 страниц), Руководство по эксплуатации (12 страниц)
Печатать страницу
10.
MOvINg AND STORAgE INSTRUCTIONS
10.1
Store the jump starter in an upright position.
10.2
Store inside, in a cool, dry place.
10.3
do not store the clips on the handle, clipped together, on or around metal, or
clipped to cables. The clips on the jump starter are live and will produce arcing
or sparking if they come in contact with each other. To prevent accidental
arcing, always keep the clips on the storage holders when not using it to jump
start a vehicle.
10.4
If the jump starter is moved around the shop or transported to another location,
take care to avoid/prevent damage to the cords, clips and jump starter. Failure
to do so could result in personal injury or property damage.
surface where damage could occur if the internal battery should unexpectedly
leak acid.
10.5
IMPORTANT:
•
CHARgE IMMEDIATELY AfTER PURCHASE
•
KEEP fULLY CHARgED
Charge the jump starter internal battery immediately after purchase, after
every use and every 30 days.
All batteries are affected by temperature. The ideal storage temperature is
at 70 degrees Fahrenheit. The internal battery will gradually self-discharge
(lose power) over time, especially in warm environments. Leaving the battery
in a discharged state may result in permanent battery damage. To ensure
satisfactory performance and avoid permanent damage, charge the internal
battery every month.
11.
TROUBLESHOOTINg
PROBLEM
The jump starter won't jump
start my car.
do not use and/or store the jump starter in or on any area or
POSSIBLE CAUSE
Jump Start/USB Switch is
not turned ON.
Clips are not making a good
connection to the battery.
The jump starter battery is
not charged.
The vehicle's battery is
defective.
13
•
REASON/SOLUTION
Turn ON the Jump Start/
USB Switch.
Check for poor connection
to battery and frame. Make
sure connection points
are clean. Rock the clips
back and forth for a better
connection.
Check the battery charge
status by pressing the
button on the front of the
jump starter. See dIgITAL
dISPLAY FUNCTIONS
section of this manual.
Have the battery checked.
•