EPHREM LE CARRE Инструкции по сборке

Просмотреть онлайн или скачать pdf Инструкции по сборке для Печь EPHREM LE CARRE. EPHREM LE CARRE 2 страницы.

Печатать страницу

L E C A R R É

⑦

③

④

Position the narrower

side of the element

towards the back

EXPLODED VIEW

WARNING: DO NOT USE ALCOHOL, GASOLINE, OR SIMILAR FLAMMABLE LIQUIDS TO IGNITE OR REKINDLE THE FIRE

⑥

④

⑤

①

Total weight: 320kg

Packaged on a pallet measuring 100×120 cm

A S S E M B LY I N S T R U C T I O N S

INCLUDED ACCESSORY

Steel door

Step 1:

Trim elements if needed with a wood rasp.

Step 2:

Build a concrete slab measuring at least 110 (width) x 110 (depth) x 10 (thickness) cm and

let it dry for at least 15 days. Create a thin bed of

cement (the recommended ratio is one part cement to six parts sand). Place the 6 base slabs

Ⓐ

moistened beforehand (labeled

aligned and that the top surface is leveled. Remove any excess mortar from around the base.

Allow the ﬂoor to dry for 24 to 48 hours before proceeding.

Step 3:

Position the rear components

④

Step 4:

Join the side elements

⑥

Step 5:

Position the smoke drain

⑦

Step 6:

The marking

represents the location for the start of the chimney, which can be

created in two ways:

• Using ﬂue tiles measuring 20x20 cm (for the 3

required)

• Alternatively, by installing a connection pipe (available as an optional accessory) and

connecting a stainless steel ﬂue with an inside diameter of Ø200 mm.

Step 7:

Build a wall surrounding the oven using 10 cm bricks or breeze blocks, ensuring a 5 cm

gap is maintained between the wall and the oven, and a 7 cm gap in the depth.

Step 8:

Wrap the oven with ﬂexible rolls of rock wool/ceramic wool (10 cm thickness) or opt for

Ephrem ﬁbre insulation (available as an additional option). Afterward, cover the insulation layer

with:

• Either a generous 15 cm layer of vermiculite concrete,

• Or use 0/4 dry sand to reach a height of 15 cm above the oven arches.

Step 9:

Build a protective shelter for the oven to shield it from the elements, ensuring there is

approximately a 20 cm gap between the shelter and the top of the oven insulation, creating a

decompression chamber with vents.

For domestic use only

①

lean mortar

(2 to 3 cm thick) using standard

Ⓕ

) on top of the mortar bed, ensuring they are properly

③

according to the indicated arrangement.

⑤

and the two front elements

together without jointing them.

on a bed of

refractory

mortar.

tile and upwards, additional support is