Olympus BH-2 BHSU Полная разборка, очистка и сборка - Страница 13
Просмотреть онлайн или скачать pdf Полная разборка, очистка и сборка для Микроскоп Olympus BH-2 BHSU. Olympus BH-2 BHSU 23 страницы. Sliding focus block
Печатать страницу
Figure 30 – Guide rails installed into the arm casting
Reinstall the Guide Rails into the Focus Block
Per the procedure described in
document, reinstall two of the short guide rails into the
side groove in the focus block (see
remove any exposed grease from the two guide rails
(see Figure 32 and Figure 33).
Figure 31 – Reinstall short guide rails into the focus block
Figure 32 – Scrub grease from guide rails and focus block
Complete Teardown, Cleaning, and Reassembly of the Olympus BH‐2 Sliding Focus Block
Appendix 1
of this
Figure
31) and
Figure 33 – Guide rails installed into the focus block
Reinstall the Guide Rails into the Guide Block
Per the procedure described in
document, reinstall the two remaining short guide rails
into the side groove in the guide block (see
and remove any exposed grease from the two guide
rails (see Figure 35 and Figure 36).
Figure 34 – Reinstall short guide rails into the guide block
Figure 35 – Scrub grease from guide rails and guide block
Appendix
1 of this
Figure
Revision 2
Page 13 of 23
34)