Olympus BX43 Руководство по эксплуатации - Страница 38
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Микроскоп Olympus BX43. Olympus BX43 48 страниц. System microscope
Печатать страницу
10-2 Detailed Assembly Procedures
1
1
1
34
2
Fig. 42
5
3
4
2
Fig. 43
Fig. 44
Attaching the Auxiliary Lens for the U-LC
2
Condenser
} It is not necessary to attach the auxiliary lens if the condenser in use is
other than the U-LC.
1. Attach the auxiliary lens @ provided with the condenser into the tip of the
LED lamp housing C (U-LHLEDC) 2 or lamp housing adapter (U-LS30ADP)
by screwing the lens in the direction of the arrow.
Be careful not to touch the lens with your finger.
CAUTION
3
Attaching the LED Lamp Housing C
1. Fit the LED lamp housing @ into the mount hole on the rear of the
microscope by aligning the clamping screw 2 and screw hole 3.
2. Using the Allen screwdriver, tighten the clamping screw 2.
3. Insert the connector | of the lamp housing into the connector 5 on the
microscope.
4
Attaching the Halogen Lamp Socket
Installing the U-LS30ADP LS30 Adapter (Fig. 44)
1. Peel off the backing of double-side adhesive tape on the cable holder
@ and attach the holder on the specified position.
The area (enclosed with broken lines) on the outer side is for use in
attaching the cable holder for another option.
2. Attach the adapter in the same way as steps 1 and 2 in the LED lamp
housing C attaching procedure described above.
(Fig. 42)
(Fig. 43)
(Fig. 44)