Olympus BX51 Руководство по эксплуатации - Страница 28

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Микроскоп Olympus BX51. Olympus BX51 34 страницы. System
Также для Olympus BX51: Руководство по эксплуатации (17 страниц), Руководство по эксплуатации (40 страниц), Руководство по эксплуатации (37 страниц), Руководство по эксплуатации (11 страниц)

5-3 Conoscopic Observation

Fig. 32

}Use 20X to 100X objectives.

1. Engage the analyzer and adjust for extinction position.

2. Swing the condenser top lens into the light path.

3. When using the polarizing intermediate attachment U-CPA, push in the

Bertrand lens knob to engage the Bertrand lens into the light path.

4. Engage an objective of your choice (20X to 100X).

5. Open the aperture iris diaphragm.

6. Slide the focusing knob on the U-CPA to focus on the conoscopic image.

}When the polarizing intermediate attachment U-CPA is not used,

conoscopic observation is possible by removing an eyepiece from the

observation tube and looking at the rear focal plane of the objective

directly.

}To obtain good image contrast, place an interference filter (45IF546) in

the filter holder on the light exit of the microscope.

}If the periphery of the conoscopic image is dark, move the condenser

vertically to find the position where the periphery is brightest.

BX51/52-P