Olympus CKX41 Руководство по эксплуатации - Страница 29

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Микроскоп Olympus CKX41. Olympus CKX41 36 страниц. Reflected fluorescence system
Также для Olympus CKX41: Обзор (7 страниц), Брошюра и технические характеристики (4 страниц), Руководство по ремонту (43 страниц)

Fig. 19

Fig. 20

5. Set the burner type switch 5 on the rear of the power

supply unit according to the type of the mounted burner

(L1 or L2). (Fig. 19)

# If the burner socket clamping screw 1 is loosened while

the burner is on, the interlock switch turns off the burner.

To restart the burner, first set the main switch of the power

supply unit to "

Then, after firmly tightening the clamping screw, set the

main switch to " " (ON) again.

* The burner cannot be re-ignited for about 10 minutes,

that is, until the mercury vapor inside it has cooled down

and condenser to liquid.

Caution for burner replacement during observation

The burner, lamp housing and its surroundings are very

hot during operation.

Before replacing the burner, set the main switch to "

(OFF), unplug the power cord and wait until the burner,

lamp housing and its surroundings cool down completely.

6. Press the reset button 6 on the front of the power supply

unit to reset the hour counter display to "0.0". (Fig. 20)

}The unit of hour counter display is hour. Replace the burner

when the displayed time reaches "100.0" hours.

Note that the above-mentioned life of a mercury burner may

expire before the above-mentioned average depending on

how frequently the main switch is set to " " (ON) and " "

(OFF). When ignition of the burner deteriorates or flickering

becomes noticeable, replace the burner regardless of the

hour counter display.

# Be sure to reset to "0.0". Otherwise, the burner may not

be ignitable.

Clear mode than 10 cm of space around the power

supply unit to assure proper heat radiation.

The power supply unit should be installed so that the

main switch can easily be accessed and set to "

in case of emergency.

REFLECTED FLUORESCENCE SYSTEM

" (OFF), wait for about 10 minutes*.

FOR CKX41

(Fig. 17)

" (OFF)