Olympus PFL-E01 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для фотоаппаратов Olympus PFL-E01. Olympus PFL-E01 29 страниц. Electronic flash waterproof case for the fl-36

Печатать страницу

Handling the Product

●Use or storage of the product at the following locations may cause defective operation, defects,

trouble, damage, fire, internal clouding, or water leakage. Always avoid these locations.

・Places where high temperatures exist, such as in direct sunlight, in a closed vehicle, etc.,

and/or where extreme differences in temperatures exist.

・Places where there is a lot of dust.

・Places where there are open fires.

・Places subject to vibrations.

・Places where volatile chemicals are stored or used.

・Water deeper than 60 meters.

●This product is made of polycarbonate resin with excellent impact resistance, but it may

be damaged by scraping against rocks etc. It also may break when it hits hard objects or

is dropped.

●This product is not intended as a case to protect the internal flash from heavy knocks. If

the case is subjected to a heavy knock or significant pressure, the flash inside may be

severely damaged.

●When this product is not used for a long time, the O-rings may deteriorate, diminishing its

waterproof properties. Therefore, please use the case only after first performing the first

and final system checks described in this instruction manual.

●Do not apply excessive force to the arm mount and underwater TTL cable connector.

●The range of the flash underwater may be lower than on land depending on the

conditions at the time of shooting (clarity of the water, suspended matter, etc.). Be

sure to check the image before actual shooting.

●Do not use the following chemicals for cleaning, corrosion prevention, prevention of

fogging, repair or other purposes. When these are used for the Case directly or indirectly

(with the chemicals in vaporized state), they may cause cracking under high pressure or