AccuLine 40-6540 Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Измерительные приборы AccuLine 40-6540. AccuLine 40-6540 13 страниц. Automatic rotating laser
Печатать страницу4.
Open the lower cover of the remote control to access the operation panel
for the calibration.
Multiple presses of the "X/Y" key toggles calibration control
between the X-axis, Y-axis, and Z-axis (as indicated via the x, y, and
z Calibrater LED's located on the instruments keypad. See below
Once the desired axis has been selected, the "UP Arrow" and "Down Arrow" keys are used to adjust
the position of the laser plane.
X-axis Calibration
1.
Place the unit into calibration mode as discussed above.
2.
Position the unit so that the X axis directing to the two targets.
3.
Press "X/Y" key on the remote control to toggle calibration control to the X-axis
4.
Press the "UP Arrow" and "Down Arrow" keys, respectively to adjust the laser height to coincide with the
zero position of the target
5.
Press the "Enter" key on the remote control to accept the calibration value, noting that the status indicator
goes "off"
6.
After calibration is completed, make sure to power off the unit and then power on again to activate the
calibration.
Y-axis Calibration
1.
Place the unit into calibration mode as discussed above.
2.
Position the unit so that the Y axis directing to the two targets.
3.
Press "X/Y" key on the remote control to toggle calibration control to the X-axis
4.
Press the "UP Arrow" and "Down Arrow" keys, respectively to adjust the laser height to coincide with the
zero position of the target
5.
Press the "Enter" key on the remote control to accept the calibration value, noting that the status indicator
goes "off"
6.
After calibration is completed, make sure to power off the unit and then power on again to activate the
calibration.
Once calibration is complete re-verify accuracy as directed in sections 4.1.1 and 4.1.2, and repeat as necessary.
Prepared By: Tim Wojo
Revision - Date: 0 – 20080430
40-6540 Service Manual
Status Indicator
Page 10 of 13