AccuLux UniLux 5 Инструкция по применению - Страница 3

Просмотреть онлайн или скачать pdf Инструкция по применению для Заливающий свет AccuLux UniLux 5. AccuLux UniLux 5 4 страницы. Halogen hand-held searchlight

Печатать страницу

ken des Deckels in Pfeilrichtung mit einem

Schraubendreher lösen und den Deckel abneh-

men. Akku entnehmen und einer geeigneten

Sammelstelle zuführen.

Gewährleistung

Unsere Gewährleistung für Material und Verar-

beitung beträgt 24 Monate. Verschleißteile wie

Batterien und Glühlampen sind von der Gewähr-

leistung ausgenommen. Bei unsachgemäßer

Handhabung besteht keine Gewährleistung.

Device Description

Setting collar

ON – OFF switch

Battery-charge indicator

C -

Strap fixing

Fixing clips

Wall fixing

Wall plug transformer

H – Vehicle on-board charger

Technical specifications

Casing material

Plastics (impact resistant)

Bulb

E10 5.2V/0.85A Halogen

Operating time

Range

Battery

Charging time

100-230 V AC 50/60 Hz;

Charge voltage

Weight

Dimensions in mm

Fitting the wall fixing "F"

Drill two holes in the wall, 110 mm apart verti-

cally. Ensure that the wall fixing is fitted close to a

plug socket. Take care not to damage the mains

supply cable when drilling the holes in the wall.

Now use two screws to fasten the wall fixing to

the wall.

approx. 150 min

approx. 1000 m

NiMH 4.8V/2 Ah

21 h

12/24 V DC

440 g

256x93x93

Charging

Charge the torch for at least 14 hours before

using for the first time. It is charged in the wall

fixing "F" with the aid of the wall plug trans-

former "G". The torch is designed for continuous

charging and is protected against overcharging.

We recommend returning the torch to the wall

fixing when not in use to ensure a fully-charged

torch is available for use at all times. It is not

possible to use the torch while it is being

charged. The charge process is indicated by the

red LED indicator "C".

Use

To use, remove the torch from the wall fixing "F".

To switch it on, push the switch "B" forward. The

operating time of the torch is 2.5 hours (see

technical specification). Use the setting collar "A"

to focus the focal point.

Replacing the bulb

The complete setting collar "A" (with disc and

reflector) can be pulled off to the front by press-

ing in the fixing clips "E" on the sides. The bulb

(see technical specifications) is now freely acces-

sible and can be replaced.

Important information

Only connect the wall plug transformer "G" to an

indoor 120/230 Volt alternating current supply.

Do not expose the torch to wet weather and

extreme temperatures. Always use a damp cloth

to clean the torch.

Disposal information

Do not throw defective NIMH cells or

defective torches in the domestic waste. To

remove the battery, undo the fixing hook of the

cover on the underside of the torch by turning in

the direction of the arrow using a screwdriver

and remove the cover. Remove the battery and

dispose of in asuitable place (battery collection

point).

Warranty for defects

We provide a 24 month warranty for defects for

materials and workmanship. Wear parts such as

bulbs and batteries are not covered by the war-

ranty. No warranty provided for defects resulting

from incorrect use.