Axminster TS-200 Руководство по эксплуатации и список деталей - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и список деталей для Пила Axminster TS-200. Axminster TS-200 17 страниц. 200mm table saw
Печатать страницу
longitudinal limit stop to zero on the limit stop guide rail scale and then set the limit stop with the guide rail
precisely with respect to the saw blade. Secure the adjustment with the left hexagonal socket screw (FIG 8).
(This procedure should be repeated each time the saw blade is replaced.)
FIG 8
FIG 9
FIG 10
Use the right guide notch as an optical reference to check that the longitudinal limit stop setting is parallel.
(FIG 9) (FIG 10 ). Then longitudinal limit stop can be moved or turned for flat work pieces by loosening the
lower M8 clamp screw in the limit stop holder (FIG 11) (FIG 12).
The longitudinal limit stop can be used on the left or the right side of the saw blade.
Note: Regularly check that the longitudinal limit stop is parallel to ensure perfect cutting.
FIG11
FIG12
Adjusting the Cutting Height
Adjust the height with the hand wheel (FIG 13)
Select a cutting height such that the saw blade teeth still protrude from the work piece to be processed (14)
FIG13
FIG14
Adjusting the Pivot
Release the lock knob A (FIG 15). The saw blade can be lowered by up to 45º by applying pressure to the
hand wheel B (FIG 15) . The height can then be adjusted as the pressure on the hand wheel is removed.
8