Axminster UE-127DV1 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Пила Axminster UE-127DV1. Axminster UE-127DV1 16 страниц. Portable band saw

Auto Cutting

Feed Rate by spring holding

Turn toggle switch to down location. Select

spring as outer location. Press green button

down to start auto cutting.

Cutting mode switch

Feed Rate by Handle with Trigger

Switch

Turn toggle switch to upper location.

Select spring as inner location.

Push down the trigger switch for cutting material

by handle.

For auto cutting

For manual cutting

Trigger switch

The machine uses a swivel miter base for angle

cutting from 0 ~ 60 degree. On the sawing arm,

there is an attached scale (Q) in Fig.7. This

machine is preset zero degree before leaving

the factory. Angle cutting is adjusted as follows.

Loosen handle (R) Fig.7 to release the arm.

Move this swivel arm forward along the

scale to search a right index for the work to

be cut.

If the pointer matches the right index on the

scale. Tighten the handle, and a perfect

angle cut will be given.

Disconnect machine from the power source!

No matter when, where, or how. Pay extra

attention to the saw during it in transportation,

operation, and maintenance. Or adjustment.

Failure to comply may cause serious injury!

Raise this saw head up-to proper position

by lifting up the arm Fig. 8.

- 8 -

Fig. 7

WARNING

Fig. 8