Axminster AW19FTH Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Инструменты Axminster AW19FTH. Axminster AW19FTH 12 страниц. Morticers

Operating Instructions...

A X M I N S T E R

W H I T E

This section refers only to the AW19FTH Morticer

Fig 3

Caphead bolt (E)

Fig 4a

Pointer

Table Scale

Fig 5

Column tilt assembly

Tilt column

handwheel (F)

Tilt table

handwheel (F)

Fig 4

Worktable gib strip adjusters

Lock

Column lock

pin (G)

Caphead bolt (E)

Fig 5a

Column Scale

The morticer requires only minor maintenance such as routine cleaning and lubrication.

Keep the machine clean and use a light application of thin oil to the moving parts.

Chisels and bits should be kept sharp for best performance, a discoloured tip is usually a

sign of excessive heat caused by a blunt auger and/or chisel. Bits are best sharpened with a

small file and chisels with the special mortice chisel sharpeners available through Axminster

Power Tool Centre (Tel 0800 371822).

Burrs can be removed from the sides of the chisel on a fine oilstone or waterstone but great

care must be taken not to taper the chisel as this will cause the chisel to jam in the timber.

AW19FM Standing Morticer

Un-lock

OIL

Oil

Pointer

Maintenance...

Lever handle mechanism

AW19FTH Tilt Head Morticer

A X M I N S T E R

W H I T E