Axminster Trade Series Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Инструменты Axminster Trade Series. Axminster Trade Series 20 страниц. Wall mounted extractor

Печатать страницу

Operating Instructions

Testing the Extractor
Connect the extraction hose/s to the extractor's
outlet, if not done so already.
WARNING!! MAKESURE CHILDREN ARE KEPT AWAY
FROM THE EXTRACTOR WHILE IN OPERATION.
CONNECT THE POWER SUPPLY TO THE
MAINS AND SWITCH ON!
NOTE: ALWAYS TURN ON/OFF THE EXTRACTOR BY
THE NVR CONTROL SWITCH NOT THE MAINS
SWITCH!
WAIT UNTIL IT IS UP TO FULL SPEED AND CHECK FOR
SIGNS OF VIBRATION. IF ALL IS WELL SWITCH OFF AND
WAIT UNTIL THE EXTRACTOR HAS COME TO A COMPLETE
STOP.
DISCONNECT THE POWER SUPPLY FROM THE MAINS!
IF THE EXTRACTOR FAILS TO START UP OR THERE ARE
ANY STRANGE NOISES APART FROM VIBRATION SOUNDS,
CONTACT "TECHNICAL AFTER SALES" FOR SUPPORT.
Phone: 03332 406406
Reduced Suction Performance
After a period of time dust, sawdust and shavings can build-up
causing blockages and reduced suction performance.
Carry out the following checks to keep your extractor working
at peak performance.
DISCONNECT THE POWER SUPPLY FROM
THE MAINS!
WARNING! ALWAYS WEAR A DUST MASK
WARNING! ALWAYS WEAR EYE PROTECTION
• Check the filter for signs of build-up of sawdust and move
the shaker paddle handle (4) back and forth to remove any
built-up dust and debris from inside, see fi g 19. Then clean
the outside with a vacuum cleaner.
• Check the hoses for blockages.
• Check the dust bag and empty if full, see fig 20-21.
12
Fig 19
4
Fig 20-21