Axminster Craft 105842 Оригинальное руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Шлифовальный станок Axminster Craft 105842. Axminster Craft 105842 17 страниц. Wide stone

Печатать страницу

Changing the Grinding Stone

Step 5-6

Remove plate flange and carefully remove the stone.

Clean the interior stone guard, inspect the new stone for

cracks and damage to either the front face or the edges

before fitting. Carefully slide the stone on the shaft, replace

the plate flange, the nut and tighten against the rotation

of the stone. DO NOT OVERTIGHTEN.

Step 7

CONNECT THE GRINDER

TO THE MAINS SUPPLY.

Reconnect the grinder to the mains supply, give the grinder

a 'short burst' , by switching it on and off quickly. Check the

grinder is not subject to any undue vibration. If the grinder

does vibrate, switch off immediately and disconnect from

the mains supply. Remove the guard cover and check

stone and plate flange is fitted correctly. Check again, if

the grinder is still vibrating the stone/s may need dressing.

Dress the new stone lightly to ensure a 'good face' and

good concentricity.

Step 8-9-10