AccuMed AT2103 Руководство - Страница 13

Просмотреть онлайн или скачать pdf Руководство для Термометр AccuMed AT2103. AccuMed AT2103 14 страниц. Non-contact infrared thermometer

1965-98 and the European Standard EN60601-1-2 and is subject to particular precautions with

regard to electromagnetic compatibility.

XIII. TROUBLESHOOTING

If you have problems while using your thermometer, please refer to this guide to help resolve the

problem. If the problem persists, please contact our customer service.

THE SCREEN DISPLAYS TEMPERATURE HIGHER THAN 42.9°C (109.2°F):

The temperature is in Fahrenheit. Change the measurement to Celsius by pressing the "°C/ °F"

button.

THE SCREEN DISPLAYS TEMPERATURE LOWER THAN 32°C (89.6°F):

To take the surface temperature, press the "Mode" button and set to the reading called "Body" ,

If the device is in Surface Temp Mode, the 32°C (89.6°F) temperature displayed is showing the

external temperature of your body, rather than the internal.

THE SCREEN DISPLAYS THE MESSAGE HI

When using the AT2103 Thermometer, the message "HI"

can show on the screen.

In this case, the temperature is above the measurement range

selected, above 42.9 °C (109.2°F) in Body Mode.

THE SCREEN DISPLAYS THE MESSAGE LO

When using the AT2103 Thermometer, the message "LO"

can show on the screen.

In this case, the temperature analyzed is under the measuring

range selected, less than 32°C (89.6°F) in Body Mode.

This message displays for various reasons. Please find below

a list of the main issues：

Reasons for LO message display

Temperature reading hampered

by hair or perspiration.

Temperature hampered by an air

draft or dramatic change in ambient

temperature.

Temperature readings are too close together,

and the thermometer did not have time to

reboot.

The measuring distance is too far.

Make sure there is no obstruction or dampness

prior to taking temperature.

Make sure there is no air blowing

in the area of use; this could affect the infrared

reading.

Pause for 3~5 seconds minimum

between readings; a 15 second

pause is recommended.

Take measurements at the recommended

distance (approx. 3~5 cm; 1.2in~2.0in).

Advice