Axminster Craft AC37E Оригинальное руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Вентиляционная вытяжка Axminster Craft AC37E. Axminster Craft AC37E 17 страниц. 1hp extractor
Печатать страницуDO NOT use this machine as a vacuum cleaner, try to
keep the waste medium to wood by-products.
DO NOT uplift workshop floor debris (stones, nails,
screws, paper etc., etc). Be aware that wood dust is an
explosive medium.
DO NOT allow any 'naked light' source to occur
anywhere near the machine. This includes cigarettes,
matches, etc, and do not place the machine near
any unprotected light bulbs, that could possibly get
broken.
The suction force is generated by a high speed fan
unit. This has the potential to amputate fingers, grab
loose clothing (ties etc.,) and 'bat' large chips etc, at
high speeds. Keep all guarding in place, and if access
to the fan becomes necessary (due to blockage etc.,)
disconnect the machine from the mains supply
and ensure the fan has come to a complete stop
before putting your hands anywhere near it.
If you are not using 'clear' extraction hose, periodically
remove the hose to check that the inlet to the
machine is not getting restricted. The safety guard
grill of the inlet duct can be particularly irksome
in this way, as long strand shavings etc., can wrap
around the grill fret.
UNDER NO CIRCUMSTANCES
SHOULD CHILDREN BE ALLOWED
IN WORK AREAS. KEEP THE WORK
AREA AS UNCLUTTERED AS IS
PRACTICAL, THIS INCLUDES
PERSONNEL AS WELL AS
MATERIAL.
Specific Safety for Dust Extractors
KEEP the particle filter clean. The machine relies on
its ability to 'blow' air through the filter to generate
good suction. If the particle filter starts to clog this
reduces the air flow and the machine becomes less
efficient.
The particle filter can be cleaned by using an 'M' class
vacuum cleaner clean the inside of the filter.
BE AWARE that in dry air periods or areas the
movement of the air through the machine can
generate static electric fields. These are not normally
a problem as the machine is bonded together via its
construction and the whole is earthed back through
the electrical supply. Problems can occur, however
with isolated items such as stands or hosing that are
insulated from the ground (standing on rubber feet,
suspended in the air etc). If possible, try to connect
everything together electrically to eliminate static
shocks. Use the integral metal coil in flexible hosing
to connect the units together.
Try to route the power cable and the hosing away
from busy walkways.
WARNING! KEEP TOOLS AND
EQUIPMENT OUT OF THE REACH
OF YOUNG CHILDREN.
ONLY USE DUST EXTRACTION
BAGS WITH THIS MACHINE NOT
DOMESTIC WASTE BAGS!
5