ABB TPS61-R Series Инструкция по сборке Руководство - Страница 14
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Промышленное оборудование ABB TPS61-R Series. ABB TPS61-R Series 20 страниц. Turbocharger
Печатать страницу
Assembly Instructions / TPS61-R
4 Installing the turbocharger / 4.2 Attaching the turbocharger to the
bracket
4.2
Attaching the turbocharger to the bracket
CAUTION
Damage to bellows
If the axes of the flanges of the turbine casing do not align with the piping,
the bellows can be damaged or destroyed.
During installation of the bellows, ensure that the axes of the flanges of
u
the turbine casing align with the piping. If necessary, correct alignment of
the turbocharger on the engine support.
Fig. 6: Placing the turbocharger on the bracket
Product
TPS61-R
TPS61-R
Table 6: Tightening torque for turbocharger fixing screws
1. Attach lifting gear to turbocharger and place turbocharger onto bracket.
2. Fit hexagon head screws (01) but do not tighten them yet.
3. Coat thread of hexagon-head screws (02) with high-temperature grease such as Loctite®
8009. Fit bellows with hexagon-head screws (02), Verbus Ripp® washers and nuts. Ob-
serve the tightening torque.
4. Tighten hexagon-head screws (01). Observe the tightening torque.
5. Connect the oil supply. Ensure that the connection is tight.
6. Connect cable to speed sensor (86505).
7. Remove the lifting gear.
Connect all the gas pipes and air lines according to the enginebuilder's instructions.
u
© Copyright 2018 ABB. All rights reserved.
Screw position
01
02
HZTL455311P0036_EN
Tightening torque
(assumed friction coefficient
µ = 0.12)
M16
300 Nm
M16
325 Nm
Revision A
August 2018