Axon Fleet Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Цифровая камера Axon Fleet. Axon Fleet 2 страницы.

Печатать страницу

The Axon Fleet camera system will go into BUFFERING mode af-

ter the boot up sequence. The BUFFERING mode holds the pre-

vious 0–120 seconds (configurable by the agency) of video (NO

AUDIO) leading up to the beginning of a recording. To record,

quickly press the EVENT button. (You also can use the Axon View

XL application to start recording.)

•

The camera now records audio as well as video.

•

The camera will beep twice to let you know that recording has

started. The 2 beeps will repeat every 2 minutes (audio noti-

fications can be deactivated if necessary). The operation LED

will blink red.

To stop all recording and return to BUFFERING mode, press the

EVENT button again. (You also can use the Axon View XL appli-

cation to stop recording.) There is a long, audible beep that indi-

cates EVENT mode has ended.

With default settings, the system does not capture audio in BUFF-

ERING mode, so anything recorded in that mode will be video-on-

ly. BUFFERING mode starts only after the camera is turned on. The

system does not record when the camera is turned off.

Camera Operation LED

The camera's operation LED displays the system's current operating

mode.

Operating Mode

Recording

Buffering

Booting up/powering down

Uploading Data

Your agency may be set up to upload video automatically via wireless capability. If not, you can upload video with an Axon Dock. If you do

not have an Axon dock, upload video with a Windows compatible computer using Evidence Sync software: axon.com/syncdownload.

Ensure the Axon Fleet system is off. Insert the camera into the Axon Dock. The dock automatically uploads data to Evidence.com services

and deletes videos from the camera.

At the beginning of the next shift, ensure that your camera displays with a green upload status LED before removing it from the dock.

Axon Dock Upload Status LED

When you plug your camera into the Axon Dock, the upload status LED on the bottom of the camera displays the system's status.

Initial connection (momentary)

In queue awaiting upload

Device ready (all videos uploaded successfully) and fully charged

Device not assigned, agency mismatch, camera set in the offline

mode, or device error

Uploading data

Firmware update, internal battery charging, extremely low battery,

or memory full

Transfer error, device re-trying to transfer

Network error

Axon Dock has no communication with the camera. Contact cus-

tomer service at www.axon.com

,  AXON, Axon, Axon Dock, Axon Fleet, and Axon View XL are trademarks of Axon Enterprise, Inc., some of which are registered in the US and other countries.

Operation LED

Blinking red

Blinking green

Solid red

System Status

Windows is a trademark of Microsoft Corporation.

Notification

The camera emits beeping sounds called audio prompts to notify

you of the system status. These audio prompts usually occur after

you perform an action with the camera.

Operating Mode

Powering on or off

Recording an event

Press the battery button while the

camera is recording

The device is ending an event and

returning to BUFFERING mode

The camera is running off the pow-

er unit (the car ignition is OFF) and

the battery is at 20% capacity or

lower

Camera memory is full (camera will

not record)

Solid red (for 20 seconds or fewer)

Solid yellow

Solid green

Blinking red

Blinking yellow

Blinking red and yellow – DO NOT remove the camera from the

Axon Dock

Blinking green and yellow

Blinking red, yellow, and then green (cycling all colors)

LED off

MPC0247 Rev: E

Audio

One beep

Two beeps (every 2 minutes)

Two beeps

One long beep

Four quick beeps (every 5

minutes)

Three beeps

LED Indication