Cineo Edge 80 Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Светильник Cineo Edge 80. Cineo Edge 80 16 страниц.

HSIC vs RGBC

Both personalities offer advantages for specific applications, and are provided to meet the lighting

control space preferred by the individual user.

HSIC

In HSIC mode, the 4-channel DMX profile, as well as the local interface map as follows:

Intensity - Controls the total fixture output. Cineo's Photo-Accurate Dimming™ maps the 0-100%

dimming curve to actual camera stops for precise output control.

CCT - Adjusts the primary white light base from 2700-6500K.

Saturation - This control blends and balances the amount of saturated color with the CCT base, from

pristine white to deep artistic color.

Hue - To optionally add saturated color, the HUE control adjusts the RGB hue angle to be added with the

Saturation control.

RGBC

The RGB Personality is technically considered RGBC, where the reference white point can be selected

as well as values of the primary Red, Green and Blue channels. This is extremely valuable in correlating

RGB operation in context with the white balance selected on the camera. Cineo employs SmartRGB™

technology to provide color-accurate white when blending R, G and B signals. This allows RGBC users to

work within a prescribed CCT for the white point, with maximum color rendering.

RDM Support

The fixture supports RDM Discovery and Identify commands for identifying fixtures on the network.

The Lightblade Edge supports both GET and SET commands remotely through an RDM controller. The

GET information provided includes the Unit ID, device type, firmware revision, DMX address and DMX

Personality.

The unit supports SET Commands to allow remote programming of the following:

DMX Personality

DMX base address

Calibration (this should only be done by qualified service personal)