Alphasonik PFZ692E Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Акустическая система Alphasonik PFZ692E. Alphasonik PFZ692E 16 страниц. Full range speaker systems

Печатать страницу

NOTE:

Alphasonik strongly recommends that you operate your

system at low volumes prior to the completed installation of your

Alphasonik speakers. This will allow a test of the speaker before

securing it to its permanent location.

CAUTION:

Make sure that all speaker wiring is fully protected from

cuts, tears and possible wear. Any short circuit developing as a result

could severely damage the source unit or possibly the amplifier. Make

sure all speaker wires easily reach the speaker terminal with no stress

on the wires or connectors.

MOUNTING:

Confirm the mounting location and depth requirements by

inspecting the area where the speaker will be mounted.

speakers will fit into stock locations on the vehicle, in this case only

depth is important.

If the location you have picked does require cutting, you

may use the supplied template to help you locate and mark the

mounting location and cuts to be made. Be careful when cutting out

the template. If you cut the template properly, the speaker will be a

perfect fit.

If there is a cosmetic panel where the speaker will be

mounted, we recommend using a utility knife to carefully cut a hole in

it. Confirm the cut by placing the speaker in the hole. You may

modify the hole as necessary.

If it will be necessary to cut steel, reinstall the cosmetic

panel in place and use the hole you have previously cut as a template.

This will help to insure proper cutting and a good fit. Mark the location

for the speaker mounting screws, remove the panel and drill the screw

holes. When finished you may replace the panel.

After cutting and drilling all holes, inspect the mounting

areas for any metal burrs or rough edges. File any area that may

interfere with the mounting of the speaker.

Clean any metal shavings from the mounting area and

check for areas in which water may enter the speaker cavity. Treat the

Most