Alphasonik V80BN Руководство - Страница 5

Просмотреть онлайн или скачать pdf Руководство для Наушники Alphasonik V80BN. Alphasonik V80BN 9 страниц.

OPERATION

NOTE:

If the noise canceling is turned on, all ambient

noise will be reduced.

TURNING ON:

Turn on the headset by pressing the On / Off Multi function

button for three seconds. The status LED will flash blue rapidly

indicating that the headset is searching for a device that has

been paired already. Once connected, the LED will flash blue

slowly. After the device has been learned, it will automatically

connect when in range.

BLUETOOTH MODE:

Connecting a device (see section Bluetooth Connection).

Start playback on the device and use the headset or

source unit to control the playback.

(NOTE: VOLUME CONTROL)

The volume settings on the source unit also

affect the playback volume on the headset.

OPERATION CONTINUED

WIRED MODE:

Using the 3.5mm cable, connect one end to your audio

source and the other end to the 3.5mm audio port.

Control the playback on the source unit.

(NOTE: VOLUME CONTROL)

The volume settings on the source unit also affect the

playback volume on the headset.

TURN OFF:

Turn off your headset by holding down the On / Off multi

function button for three seconds. The status LED will

illuminate red briefly and then turn off.

NOISE CANCELING:

When Noise Canceling (ANC) is activated, the

ambient noise that is picked up from the top of the microphone

is automatically counter measured. The Noise Canceling

feature significantly reduces the surrounding ambient noise.

Switch the Noise Canceling ON by pressing the ANC

button for 2 seconds. The blue LED will illuminate.

Turn OFF the Noise Canceling by pressing the ANC button

for 2 seconds. The blue LED illumination on the left-side

of the headphone will turn off.