Alphasonik PBAT10E Руководство пользователя - Страница 6

Просмотреть онлайн или скачать pdf Руководство пользователя для Шкаф Alphasonik PBAT10E. Alphasonik PBAT10E 16 страниц. 10” amplified vented bass enclosure

Печатать страницу

ing to install any product. The routing of wires, power connections and

mounting locations should be planned first. As with any car stereo instal-

lation, all work performed should be checked thoroughly and carefully

prior to the operation of the system.

will greatly affect the overall performance of your audio system. Avoid

areas that do not provide a flat, sturdy mounting surface.

NOTE: Alphasonik strongly recommends that you operate your system at

low volumes prior to the completed installation of your Alphasonik enclo-

sure. This will allow a test of the speaker before securing it to its perma-

nent location.

CAUTION: Make sure that all wiring is fully protected from cuts, tears

and possible wear. Any short circuit developing as a result could severely

damage the source unit or possibly the amplifier. Make sure all wires eas-

ily reach the amplifiers terminal with no stress on the wires or connectors.

It is always best to plan the complete installation prior to attempt-

The placement of your Alphasonik enclosure within your vehicle

MOUNTING:

Confirm the mounting location by inspecting the area where the

enclosure will be mounted.

Before screwing anything double check where all wires are located

and ran. Check underneith the vehicle for gas lines, brake lines,

and gas tank. If there is anything like that we suggest to find an

other location to mount the enclosure.