ARC Automate Руководство по программированию - Страница 10
Просмотреть онлайн или скачать pdf Руководство по программированию для Пульт дистанционного управления ARC Automate. ARC Automate 16 страниц. 15 channel remote
Печатать страницу
6
INITIAL SET UP
6.1
Check motor direction
To check travel direction of shade, press UP or
DOWN on controller.
Quick Press = Step
Long Press = Continuous Travel
IMPORTANT
Damage to shade may occur when operating motor prior to
setting limits. Attention should be given.
6.2
Set Limits
Move shade to the desired highest or lowest
position by pressing the UP or DOWN buttons
on controller.
IMPORTANT
Cycle shade up and down prior to setting limits to settle fabric
Initial set-up is not complete
IMPORTANT
For systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto
lock mechanism when the shade is raised.
10 | Automate
Programming Instructions | 15 Channel Remote
™
OR
OR
To reverse shade direction, hold both
UP AND DOWN until the motor responds.
Motor Response
Approx.
IMPORTANT
Reversing motor direction using this method is only possible
during initial set-up
Direction change will not occur if switch is locked.
See Section 6.3.
To save upper limit, hold UP AND STOP.
To save lower limit, hold DOWN AND STOP.
Motor Response
5
Approx.
SECS
IMPORTANT
After setting limits, motor will automatically exit from initial
set-up mode.
+
+
+