cinetto B-MOVED PS48KM10002P0001 Руководство по быстрому использованию - Страница 18
Просмотреть онлайн или скачать pdf Руководство по быстрому использованию для Системы управления cinetto B-MOVED PS48KM10002P0001. cinetto B-MOVED PS48KM10002P0001 20 страниц. Wave sensor
Также для cinetto B-MOVED PS48KM10002P0001: Руководство по быстрой установке и настройке (19 страниц)
Печатать страницуTouch the sensor you want to pair, this will be immediately recognised, causing the LED to fl ash quickly twice before
turning off. At this point the procedure is completed and the devices are correctly paired.
•
Up to 10 different sensors can be paired with each channel.
•
The receiver remains in the "pairing" phase for 30 seconds. If no sensor is touched during this time, the
procedure is blocked.
•
If you try to pair a sensor already paired to the channel, the LED will fl ash quickly twice and then block
the procedure.
•
If nothing happens, this means that either there is a system malfunction or the maximum number of sensors
that can be paired with the channel has been reached. Try resetting the channel (see point 2) and repeat
the pairing.
2. Reset
To reset a channel, press and hold the corresponding button for 10 seconds. The LED will start to fl ash and then remain
steady for two seconds. Once it stops fl ashing, the reset procedure is completed and it will be possible to pair again
to the channel up to a maximum of 10 sensors.
18