Axor Starck 10135XX1 Инструкции по установке / гарантия - Страница 5
Просмотреть онлайн или скачать pdf Инструкции по установке / гарантия для Сантехническая продукция Axor Starck 10135XX1. Axor Starck 10135XX1 9 страниц. Axor - hansgrohe, inc. widespread lavatory faucet installation instructions / warranty
Также для Axor Starck 10135XX1: Технический паспорт (1 страниц)
Печатать страницу
Install the pop-up drain
Remove the plunger assembly.
Unscrew the drain outlet flange from the tee.
plunger
Unscrew the tailpiece from the tee. Wrap
height adjuster
the threads with two layers of Teflon tape and
replace.
flange
Install the white, flexible sealing gasket to the
flange. Place it in the sink outlet.
From under the sink, install the black mack gas-
ket, white friction ring and retainer nut to the
sealing gasket
flange. Do not tighten the nut against the bottom
of the sink at this time.
mack gasket
Thread the tee and tailpiece to the flange. The
pivot must face the faucet. If necessary, turn the
drain assembly.
pull rod
friction ring
Tighten the retainer nut.
retainer nut
Place the plunger assembly in the drain.
Install the horizontal rod so that the end goes
tee
through the loop in the bottom of the height
adjuster.
pivot ball nut
Install and hand tighten the pivot ball nut.
Attach the swivel connector to the end of the
tailpiece
horizontal rod.
horizontal rod
Attach the swivel connector to the end of the
pull rod. Position as desired and tighten with a
small, flathead screwdriver.
swivel connector
5