ARC A015 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Печь ARC A015. ARC A015 16 страниц. 60cm built-in oven

DIMENSIONS FOR OVEN AND INSTALLATION

595mm

INSTALLATION NOTES:

• If fitted with plug and lead the location of the power point cannot be mounted directly behind the

the oven as this will impede the oven sitting correctly into the cabinet.

• When mounted under bench and there is a bench above the oven, air flow ventilation is

important to help keep the cabinets and oven electronics from getting to hot. Please note three

ways that this can be achieved and illustrated above with the matching letters.

o A - This represents the cabinet rear panel being removed. With the panel removed, it can

draw some air from under the base panel and behind the adjacent cabinets

o B -- This represents the use of plinth supports at the bottom on either side in lieu of the

cabinet base panel to support the oven in place and improves the air flow.

o C-IIf base panel is in place it is recommended to cut an opening under the oven to draw

air through and around the oven. Minimum size cutout should measure 400mm x 400mm.

One of these methods MUST BE incorporated otherwise warranty may be voided.

• To improve the efficiency of keeping the cabinet and oven electronics from getting to hot,

the oven is fitted with a cooling fan located in top of the oven. Ambient air from outside the

oven is drawn in by means of this cooling fan and the hot air is expelled from a series of

vent holes located at the top of the oven cavity just above the door.

NOTE: Even after the oven has been turned off the cooling fan will continue to run for a period

of time to keep doing it's job. There is no need to be concerned as this normal and uses very

little energy.

Oven vent holes

560mm

575mm

570mm

min.

600mm

560mm

600mm