ARC Audio XDi 6.2 Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные колонки ARC Audio XDi 6.2. ARC Audio XDi 6.2 4 страницы. Xdi series high performance component speakers

Печатать страницу

CAUTION:

Please check the suitability of the installation location

before you begin. Do not cut any of the car's structure.

Pay attention to the mechanism of the window and door.

If you do not have experience with automotive electrical

and mechanical systems contact a professional

installer. Paying a qualified installer is almost always

cheaper then paying a dealership to repair your car.

THE INSTALL

After you have found the best location for the woofer,

make or enlarge the mounting hole. Make sure the

opening is just large enough for the woofer to fit tightly

with no gaps. Make sure the surface is flat and that

the speaker does not bind up in the opening. Use an

awl or felt pen to mark the panel and drill the screw

holes without the speaker in place. This will save the

costly mistake of punching a hole in one of your new

speakers. Install the woofer with the grill ring using the 4

screws provided with this system. Firmly seat the grill

into its ring.

Remove the grill from the trim ring first then follow the

steps below installation.

Place the speaker in the opening with the trim

ring over it.

Screw the trim ring through the panel with the

clips beneath.

Install the grill into the trim ring. Add a few drops

of glue if necessary.

Snap in the finish ring.

GRILL

SCREWS

SPEAKER

GRILL RING

PANEL

CLIPS